Kenmore 11022702101 user manual download (Page 8 of 33)

Languages: English
Pages:33
You can view the full version and download it in PDF format.
Page 8 of 33
Drain
System
The washer can be installed using the
standpipe
drain system (floor or wall), the
laundry tub drain system,
or the floor
drain system. Select the drain hose instal-
lation method you need. (See "Alternate
Parts You May Need.")
I
2
Standpipe
drain system - wall or floor
(view 1 & 2)
The standpipe
drain requires a minimum
diameter
standpipe
of 2 in. (5 cm). The
minimum carry-away
capacity can be no
less than 17 gal (64 L) per minute. A 2 in.
(5 cm) diameter
to 1 in. (2.5 cm) diameter
standpipe
adapter
kit is available. (See
"Alternate
Parts You May Need.")
The top of the standpipe
must be at least
39 in. (99 cm) high and no higher than 96
in. (2.4 m) from the bottom of the washer.
Floor drain system (view 2)
The floor drain system requires a siphon
break that may be purchased separately.
(See "Alternate
Parts You May Need.")
The siphon break must be a minimum of
28 in. (71 cm) from the bottom of the
washer.
Additional
hoses might be
needed.
Electrical
Requirements
Electrical Shock Hazard
Plug into a grounded
3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to
follow
these
instructions
can result in
death,
fire,
or electrical shock.
A 120-volt, 60-Hz.
AC-only,
15- or 20-
ampere, fused electrical
supply is
required. Time-delay
fuse or circuit
breaker is recommended.
It is recom*
mended
that a separate
circuit serving
only this appliance
be provided.
This washer
is equipped
with a power
supply cord having a 3 prong ground
plug.
2
Laundry
tub
drain system (view 1)
The laundry tub needs a minimum 20 ga]
(76 L) capacity. The top of the laundry tub
must be at least 39 in. (99 cm)
above
the
floor and no higher than 96 in. (2.4 m) from
the bottom of the washer.
Sample