Kenmore 11012202100 user manual download (Page 4 of 28)

Languages: English
Pages:28
You can view the full version and download it in PDF format.
Page 4 of 28
Fire Hazard
Never place items in the washer that are dampened
with gasoline
or other flammable
fluids,
No washer can completely
remove oil.
Do
not
dry anything that has ever had any type of oil on
it (including
cooking
oils).
Doing so can result in death, explosion,
or fire.
Electrical
Shock
Hazard
Plug into a grounded
3 prong outlet.
Do
not
remove ground
prong.
Do
not
use an adapter.
Do
not
use an extension
cord.
Failure to
follow
these instructions
can result in death,
fire, or electrical
shock.
1.
Measure detergent
and pour it into the washer.
If desired,
add
powdered
or liquid color safe bleach.
Drop a sorted
load of
clothes
loosely
into your washer.
Load evenly to maintain
washer balance.
Mix large and
small items. Items should
move easily through
the wash
water. Overloading
can cause poor cleaning.
2.
(OPTIONAL) Add Liquid Chlorine
Bleach.
NOTE:
Follow the manufacturer's
directions
for safe use.
Undiluted
bleach will damage
any fabric
it touches.
The
damage
appears
as rips, holes, tears, or color loss and may
not show up until several washings
later. To avoid spilling,
use
a cup with a pouring
spout.
Do not let bleach splash, drip, or
run down
into the washer
basket.
Always measure
liquid
chlorine
bleach.
Do not guess. Never use more than the
manufacturer's
recommended
amount for a full load. Use less
with
a smaller load size.
Style 1:
With Chlorine
Bleach Dispenser
(on some models)
Use only liquid chlorine bleach in this dispenser. Pour
measured liquid chlorine bleach into the liquid chlorine
bleach dispenser. Bleach is immediately fed into washer and
is diluted automatically
during the wash part of the cycle.
Style 2:
Without
Chlorine
Bleach Dispenser
(on some models)
Let the washer
fill and begin agitating
the load.
Add bleach 5 minutes
into the wash cycle for best
cleaning
and so that bleach
can be removed
in the rinse
cycle. Pour bleach around
the agitator,
not directly
onto
the load.
3.
(OPTIONAL) Add Liquid Fabric Softener.
NOTE:
Do not spill or drip any fabric softener
onto the
clothes.
Undiluted
fabric softener
can stain fabrics.
Always
dilute
fabric softener
with warm water. Too much fabric
softener
can make some items (diapers
and
towels)
nonabsorbent.
If this happens,
do
not use it every load, or
use less of it in each load.
Style 1:
With Liquid Fabric
Softener
Dispenser
(on some
models)
Use only liquid fabric softener
in this dispenser.
Pour
measured
liquid fabric
softener
into the dispenser.
Softener is added automatically
during the rinse portion
4.
5.
6.
of the cycle. Dilute liquid fabric
softener
by filling
the
dispenser
with warm water until liquid reaches the
crossbar
in the dispenser
opening.
Style 2:
Without
Liquid Fabric
Softener
Dispenser
(on some
models)
In the final rinse ONLY, add fabric softener
that has been
diluted with
1/2
to 1 cup (125 to 250 mL) warm water.
Close the washerlid.
Turn the LOAD SIZE selector
to the correct
setting for your
wash load and the type
of fabric being washed.
You may
change the load size selection
after the washer has started
filling
by turning the selector
to a different
setting.
Set the TEMPERATURE
selector
to the correct setting
for the
type of fabric and soils being washed.
Use the warmest
wash
water safe for fabric.
Follow garment
label instructions.
NOTE:
In wash water temperatures
colder
than 70°F (21°C),
detergents
do not dissolve
well. Soils can be difficult
to
remove.
Some fabrics
can retain wear wrinkles
and have
increased
pilling (the formation
of small lint-like
balls on the
surface
of garments).
7.
(OPTIONAL)
EXTRA RINSE selector
(on some models). For an
additional
rinse and spin at the end of a wash cycle, set the
EXTRA RINSE selector
to ON. On some models,
the EXTRA
RINSE feature
is part of the cycle.
8.
Push in the Cycle Control
knob and turn it clockwise
to the
wash cycle you want. Reduce
the wash time when using a
small load size setting.
Pull out the Cycle Control
knob to
start the washer.
To stop or
restart
your washer:
TOstop the washer at any time, push in the Cycle
Control
knob.
To restart the washer,
close the lid (if open) and pull out
the Cycle Control
knob.
4
Sample
This manual is suitable for devices