Estate ETW4100SQ2 user manual download (Page 5 of 20)

Languages: English
Pages:20
You can view the full version and download it in PDF format.
Page 5 of 20
WASHERCARE
Use a soft,
damp
cloth or sponge
to wipe up any spills such as
detergent
or bleach from the outside
of your washer.
Clean your washer
interior by mixing
1 cup (250 mL) of chlorine
bleach and 2 cups
(500 mL) of detergent.
Pour this mixture
into
your washer and run it through
a complete
cycle using hot water.
Repeat this process
if necessary.
Remove
any hard water deposits
using only cleaners labeled
as
washer safe.
Cleaning
the liquid
fabric
softener
dispenser
(on some
models):
1.
Remove
dispenser
by grasping
top with
both hands and
squeezing,
while pushing
upward with thumbs.
2.
Rinse dispenser
under warm water, then replace it.
NOTE: Some models
are equipped
with a liquid fabric softener
dispenser.
To avoid damage
to the washer
or clothing,
do not
wash clothes with the liquid fabric softener
dispenser
removed
or
add detergent
or bleach to this dispenser;
it is for liquid fabric
softener
only.
This washer
does not include water inlet hoses. Whirlpool
Corporation
recommends
use of factory
specified
parts. A list of
factory
specified
hoses available for separate
purchase
are listed
on the first page of this user instructions.
These hoses are
manufactured
and tested
to meet Whirlpool
Corporation's
specifications.
Replace water inlet hoses after 5 years of use to reduce the risk
of hose failure. Periodically
inspect and replace water inlet hoses
if bulges,
kinks, cuts, wear, or leaks are found.
When replacing your water inlet hoses, mark the date of
replacement
on the label with
a permanent
marker.
3 to c,ge
Because
some water may stay in the hoses, freezing can damage
your washer.
If storing
or moving
your washer
during freezing
weather, winterize
it.
Winterizing
your washer
1.
Shut off both water faucets.
Disconnect
and drain water inlet
hoses. Pour 1 qt (1 L) of R.V.-type antifreeze
into the basket.
2.
Run washer
on a drain and spin setting for about 30 seconds
to mix the antifreeze
and remaining
water.
3.
Unplug washer
or disconnect
power.
To use washer
again
1.
Flush water pipes and hoses. Reconnect
water inlet hoses.
Turn on both water faucets.
Electrical
Shock
Hazard
Plug
into
a grounded
3
prong
outlet.
Do not
remove
ground
prong.
Do not
use an adapter.
Do not
use an extension
cord.
Failure
to follow
these
instructions
can result in
death,
fire, or electrical
shock.
2.
Plug in washer or reconnect
power.
3.
Run the washer through
a complete
cycle with
1 cup (250 mL)
of detergent
to clean out antifreeze.
Storage,
non-use,
or vacation
care
Operate your washer
only when you are at home. If you will be on
vacation
or not using your washer for an extended
period of time,
you should:
1.
Unplug washer
or disconnect
power.
2.
Turn off the water supply
to the washer. This helps avoid
flooding
(due to a water pressure
surge) while you are away.
Sample