Ask. Download. Be answered.
Washing and Drying Machines
Estate EED4300TQ0 user manual download (Page 5 of 28)
Confirm that you are not a robot.
PDF, 3.85 MB
You can view the full version and download it in PDF format.
Page 5 of 28
Use the Drying Rack to dry items such as sweaters
turns, but the rack does not move.
If your model does not have a drying rack, you may be able to
purchase one for your model. To find out whether your model allows
drying rack usage and for ordering information,
please refer to the
front page of your manual or contact the dealer from whom you
purchased your dryer.
NOTE: The rack must be removed
for normal tumbling.
use the automatic
cycle with the drying rack.
To use the drying rack
Place drying rack in dryer.
1: Your drying
rack has front legs. Slide rear pegs into
the dimples on the back wall of the dryer. Lower the front legs
to rest on the dryer opening.
Style 2: Your drying
rack does not have front legs. Do not
remove the lint screen. Slide drying rack over the bottom
the dryer door opening.
rack on frame.
Put wet items on top of rack, leaving space between
Do not allow
items to hang over the edge of the rack. Close
Select a timed drying
cycle and temperature,
or an air cycle.
must be dried on a
or by using an air cycle. Refer to the following
Start the dryer. Reset cycle to complete
Washable wool items (block
lay flat on rack)
or polyester filled)
Foam rubber filled
Keep dryer area clear and free from items that would
flow of combustion
(46 era) above
for a garage
to do so can
Clean lint screen before each load. A screen blocked
by lint can
increase drying time.
Do not run the dryer with the lint screen loose, damaged,
or missing. Doing so can cause overheating
damage to both the dryer and fabrics.
If lint falls off the screen
into the dryer during removal, check
hood and remove the lint.
The lint screen
is located on top of the dryer. Pull the lint
you. Roll lint off the screen
with your fingers.
Do not rinse or wash screen to remove lint. Wet lint is hard to
Push the lint screen firmly
back into place.
Roll lint off the screen with your fingers.
Wet both sides of lint screen with hot water.
Wet a nylon brush with hot water and liquid detergent.
lint screen with the brush to remove residue buildup.
Rinse screen with
dry lint screen with a clean towel.
Ctrl + ←
Ctrl + →
This manual is suitable for devices