Estate EED4300VQ0 user manual download

You can view the full version and download it in PDF format.
Page 8 of 28
Is the dryer located
in a room with temperature
below
45°F (7°C)?
Proper operation
of dryer cycles
requires temperatures
above
45°F (7°C).
Is
the
dryer located
in
a
closet?
Closet doors must have ventilation
openings
at the top and
bottom
of the door. Sides and front of dryer require a minimum
of 1" (2.5 cm) of airspace, and the rear of the dryer requires 5"
(12.7 cm). See the Installation
Instructions.
Has an air dry cycle been selected?
Select the right cycle for the types of garments
being dried.
Is the load too large and heavy to dry quickly?
Separate the load to tumble
freely.
Cycle time too short
Is
the automatic
cycle
ending
early?
The load may not be contacting
the sensor
strips. Level the
dryer.
Change the dryness
level setting on Automatic
Cycles.
Increasing
or decreasing
the dryness
level will change the
amount
of drying time
in a cycle.
Lint on load
Is the lint screen clogged?
Lint screen should
be cleaned
before each load.
Stains
on load or drum
Was dryer
fabric
softener
properly used?
Add dryer fabric softener
sheets at the beginning
of the cycle.
Fabric softener sheets added to a partially dried load can stain
your garments.
Drum stains are caused
by dyes in clothing
(usually blue
jeans). This will not transfer
to other clothing.
Loads
are wrinkled
Was the load removed from dryer at the
end
of the cycle?
Was the dryer overloaded?
Dry smaller loads that can tumble freely.
Odors
Have you recently
been painting,
staining
or varnishing
in
the area where
your
dryer
is
located?
If so, ventilate the area. When the odors or fumes are gone
from the area, rewash and dry the clothing.
Is the electric
dryer
being
used
for the first
time?
The new electric
heating element may have an odor. The odor
will be gone after the first cycle.
Sample