Marantz SR2100/N1S user manual download (Page 8 of 23)

Languages: English
Pages:23
You can view the full version and download it in PDF format.
Page 8 of 23
4
ENGLISH
CONTROL BUTTON ON THE
REMOTE CONTROL UNIT
z
Power switch
Press this switch to turn the power of the unit ON. If components of
Marantz AV system are connected through the REMOTE CONTROL
bus, this will turn these components ON. Press this switch again to turn
the unit OFF, and the unit enters standby mode.
x
DOOR button
Press this button to open or close the door. If components of Marantz AV
system are connected through the remote control bus, the DOOR button
allows the doors on the system components to be opened or closed.
Note:
The DOOR button is invalid if the components are not connected
through the remote control bus or the system control switch is not
set to SYSTEM position. (The system control switch is on the rear
panel.)
c
Function buttons
There are FM/AM, CD, CD R, MD, VCR, AUX, DVD, LD/VCD, and TV
buttons. These buttons are used to select the source to be played or
recorded.
To switch the input selector of the receiver, press the button twice.
v
AMP button
Press this button to switch to AMP mode of the remote control and
receiver.
b
MENU button
This button is used to turn ON the menu system of other components.
n
Cursor buttons and ENTER button
These buttons are used to move the cursor of the menu system of the
components, in the same way as the receiver’s JOG control, left, right
and enter.
m
TEXT/DISP (display) button
This button is used to display the text or other information from the DVD,
CD, CD R and MD.
Pressing this button can also indicate the present time on the main unit
or display information from the RDS data system. To change the backlight
of the LCD to dimmer or normal, press this button for more than 3
seconds.
,
MEMO/PROG (program) button
This button is used to store the preset memory of the tuner and clock or
to program CD, DVD, CD R tracks.
Button
Numeric
Amp control
1
1
6CH Direct
2
2
TREBLE down
3
3
TREBLE up
4
4
SURROUND mode selection for
PS2100
5
5
BASS down
6
6
BASS up
7
7
CHANNEL selection for PS2100
8
8
TEST TONE is activated (Only for
PS2100)
9
9
LOUDNESS control is activated
0
0 or +10
No action
.
Numeric (ten keypad) or amp control
button
These buttons are used to select the preset memory of the tuner, or to
control the BASS, TREBLE and LOUDNESS of the receiver.
Please refer below. To switch to amp control mode, press the AMP
button before pressing the numeric buttons.
⁄0
4
/TIMER program
This button is used to decrease the number on the tuner preset memory
or return to previous tracks on CD, DVD, or CD R.
To activate the timer program of the receiver in AMP mode, press this
button.
⁄1
¢
/SLEEP timer
This button is used to increase the number on the tuner preset memory
or advance to next track on CD, DVD, or CD R.
To activate the sleep timer of the receiver in AMP mode, press this button.
⁄2
Control buttons (PLAY, STOP, PAUSE,
FF, REW, REPEAT mode)
By switching input source, these buttons can be used to operate the CD
player, DVD player, CD R, MD recorder and VCR, and can be used to
operate the TV and tuner.
Please refer below.
⁄3
TV/AMP VOLUME button
These buttons are used to change the volume for listening. Press the
5
button to increase and the
button to decrease the volume.
⁄4
MUTE button
Press to mute the sound from the speakers. When this button is pressed,
the speakers’ sound level is muted and “MUTE” appears on the display.
Pressing this button again cancels the muting function, and it can also
be cancelled by pressing one of the function buttons.
This button is used to mute the sound level of the TV set when the selected
function is TV.
Button
CD, DVD, CD R,
TV
Tuner
MD, VCR, LD/VCD
Play
Play
./.. Digit
PTY
Stop
Stop
Video
No output
Pause
Pause or still
OSD
NEWS/TA
FF
FF
CH CALL
No output
Repeat mode
Repeat
No output
No output
Rew
Rew
SOUND
No output
Sample
This manual is suitable for devices