You can view the full version and download it in PDF format.
Page 33 of 35
Cleanlinessof your treadmill and its operationenvironment will keepmaintenanceproblems and service calls to a
minimum. For this reason,werecommendthat the followingpreventivemaintenanceschedulebe followed.
Clean and inspect, following thesesteps:
Turnoff the treadmill with the on/off switch, thenunplug the power cord at the waft outlet.
Wipedown the running belt, deck, motor cover,and consolecasing with a damp cloth. Never
they can cause damageto the treadmill.
Inspect the powercord. If the power cord is
Make sure the power cord is not underneaththe treadmill or in any other area whereit can becomepinched or
Checkthe tension andalignment of the running belt. Makesure that the treadmifl belt will not
componentson the treadmill by being
Clean underneaththe treadmill, following thesesteps:
Turnoff the treadmill with the on/off switch thenunplug the power cord at the waft outlet.
Fold the treadmill into the
sure that the lock latch
Movethe treadmifl to a remotelocation.
the treadmill to its previousposition.
Turnoff the treadmill with the on/off switch, thenunplug the power cord at the wall outlet.
Inspect aft assemb!vbolts of the machine forproper tightness.
Turnoff the treadmill and wait 60seconds.
Removethe motorcover.WaituntilALL LEDlights turn off.
• Clean the motor and !owerboardarea to eliminate anylint ordust particles that
to do so
result in prematurefailure of
Vacuumand wipe down the belt with a
cloth. Vacuumany black/white particles that
around the unit. Theseparticles
accumulatefrom normal treadmill use.
It is necessary
lubricate your treadmill running deck everysix months
or ]50 miles to maintain optimal performanceof your treadmill. Oncethe
reaches]50 miles, the consolewill
you to lubricate
Onlyuse lubricant providedby HorizonFitness!
with the on/off switch, then unplug the
powercord at the waft outlet.
Loosen both the rear roller bolts. (For best results, place two
removable marks on both sides of
the frame and note roller
position). Once the belt is loosened,take the bottle of lubricant
and apply it to the entire top surface of the running deck. Tighten
both rear roller bolts (matching
the marks for properposition) to
original position.Afteryou haveapplied
plug in the power
cord, insert the safety key,start the treadmill and walk on the belt
for twominutes to spread the lubricant.
Lubricate the air shockswith Teflonbasedspray.
Once lubrication is complete, reset the console by pressing and
buttons for 5 seconds.
Pleasecontact HorizonFitness with questionsabout applying lubricant toyour treadmill