You can view the full version and download it in PDF format.
Page 8 of 17
Cable end with Speakon
Connecting the MSS to audio sources
STUDIO Hi-Fi Multimedia Speaker System 2.0 can be connected to virtually any audio source (see
Before connecting, make sure that the MSS is unplugged.
To connect the MSS to a CD/DVD/MP3 player, use the included 2RCA to 2RCA stereo signal
cable. Connect the RCA-jacks of the signal cable to the CD input (
, Fig. 3) of the active speaker
rear panel, and then to the CD/DVD/MP3 player outputs. If your player has mini-jack inputs, use a
2RCA to mini-jack (Ø 3.5 mm) stereo signal cable or a mini-jack to 2RCA adapter (not included).
To connect the MSS to a PC sound card, use a 2RCA to mini-jack (Ø 3.5 mm) stereo signal cable
or a mini-jack to 2RCA adapter (not included). For this, connect the RCA jacks to RCA PC input (
Fig. 3) of the active speaker rear panel, and the mini-jack – to the sound card output.
To connect the MSS to a USB port of your PC or laptop, use the USB cable included in the
package contents. In order to do this, attach the USB cable connector to the USB input (
, Fig. 3)
on the active speaker rear panel, and insert the other connector of the USB cable to an available
USB port of your PC or laptop. The MSS has a built-in high quality USB DAC providing clear sound
transmission via a USB cable.
Two microphones can be connected to the MSS: the 1
one – to the mic 1 input (
, Fig. 2) on
the control panel and the 2
one – to the mic 2 input (
, Fig. 3) on the active speaker rear panel. A
guitar can be connected to the guitar input (
, Fig. 2) on the control panel, headphones – to
headphones input (
, Fig. 3) on the active speaker rear panel. Mono inputs input 1 (
, Fig. 3) and
input 2 (
, Fig. 3) on the active speaker rear panel serve to connect other electronic musical
instruments, except for an electric guitar.
Note. Mind the correct connection of all the inputs and outputs and proper
connecting cables in the jacks, to avoid sound distortion during reproduction.
FM antenna installation and connection
Insert the included room FM antenna into the FM antenna input (
, Fig. 3) on the rear panel of
the active speaker, as shown in the diagram, Fig. 5. Install the FM antenna in such a way that
reception quality is satisfactory, and then
x the antenna in this position.
This manual is suitable for devices