Ask. Download. Be answered.
SVEN STUDIO user manual download (Page 14 of 17)
Confirm that you are not a robot.
PDF, 646.99 KB
You can view the full version and download it in PDF format.
Page 14 of 17
If you want to activate Distortion module to achieve the distortion e
ect in the sound of the
electric guitar, turn the drive control knob (
, Fig. 2) clockwise to switch on this module. Use the
same control knob to adjust distortion e
• Usage of other electronic musical instruments.
Other electronic musical instruments (bass
guitar, synthesizer, etc.) are connected to mono inputs input 1 and input 2. Their volume level is
adjusted with aux 3 (
, Fig. 2)
aux 4 (
, Fig. 2) control knobs.
Note. Remember that volume and timbre level of the connected electronic instruments are
adjusted with volume, treble and bass control knobs respectively. Remember also that the
sound of these instruments will be laid over the audio signal of any switched on source.
STANDBY function is designed to quickly switch on/o
the device and economize power
consumption. Press STANDBY button (
, Fig. 4) of the remote control or STANDBY button (
2) of the active speaker control panel to turn on this function. If the STANDBY mode is on, the MSS
enters Sleep mode. Press STANDBY
button again, and the device will return to operation mode.
To turn o
the sound press MUTE button
on the remote control. To switch on the sound press
Ctrl + ←
Ctrl + →
This manual is suitable for devices