SVEN STUDIO user manual download (Page 13 of 17)

Languages: English
Pages:17
You can view the full version and download it in PDF format.
Page 13 of 17
12
ENG
Active Three-way Hi-Fi Stereo
System with Digital Control
Note. In order not to distract others’ attention, adjust the master volume control to its
minimum by pressing VOL– button (
i
, Fig. 4) on the remote control or turning volume
knob (
a
, Fig. 2) on the active speaker control panel. MUTE button (
b
,
рис
. 4) switches
off the sound.
Audio mixing
STUDIO stereo system has a built-in audio mixer, which allows to mix signals from 6 channels: the
main channel, two microphones, electric guitar and two electronic musical instruments. Control
knobs on the active speaker control panel – guitar mixing level control aux 1 (
k
, Fig. 2),
microphones mixing level control aux 2 (
l
, Fig. 2) and electronic musical instruments mixing level
controls aux 3 (
m
, Fig. 2) and aux 4 (
n
, Fig. 2) – make it possible to use the system for providing
sound for dance
oors, presentations and other cultural events.
Microphone usage
STUDIO stereo system has two Ø 6.3 mm jacks for connecting microphones: mic 1 on the control
panel and mic 2 on the active speaker rear panel, making it possible to use the connected
microphones when playing Karaoke soundtracks.
To switch on the microphones, connect them to mic 1 (
o
, Fig. 2) and mic 2 (
a
, Fig. 3) jacks. You
can connect one microphone or both microphones simultaneously. Then adjust the desired volume
level with a volume knob (
a
, Fig. 2) on the active speaker control panel or with VOL+
и
VOL– (
i
,
Fig. 4) buttons on the remote control. The 1
st
microphone volume is adjusted with MIC1– / MIC1+
buttons (
j
, Fig. 4) on the remote control or mic 1 knob (
e
, Fig. 2) on the active speaker control
panel. The 2
nd
microphone volume is adjusted with MIC2– / MIC2+ buttons (
l
, Fig. 4) on the remote
control or mic 2 knob (
f
, Fig. 2) on the active speaker control panel.
Then you can make presetting. To do this, using INPUT button (
m
, Fig. 4) on the remote control
or input button (
r
, Fig. 2) on the active speaker control panel, select an audio source you want to
lay the voice over. Then adjust the audio source volume and microphone (both microphones)
volume to the same level. After this choose reverberation e
ect and level with reverb (
g
, Fig. 2)
and reverb vol (
h
, Fig. 2) knobs, thus giving the sound of the voice a desirable colouring.
If both microphones are connected, you can set a desirable volume level for each microphone
separately with buttons MIC1– / MIC1+ and MIC2– / MIC2+ respectively on the remote control or
with mic 1 (
e
, Fig. 2) and mic 2 (
f
, Fig. 2) knobs respectively on the control panel. You can mix
the sound: in this case the signal from two microphones is mixed, the volume level of both
microphones simultaneously in relation to the chosen audio source is adjusted with aux 2 control
knob (
l
, Fig. 2).
Usage of electronic musical instruments
STUDIO stereo system has one guitar mono input (Ø 6.3 mm) on the control panel (
p
, Fig. 2) for
connecting an electric guitar, and two mono inputs (Ø 6.3 mm) on the active speaker rear panel for
connecting other electronic musical instruments: input 1 (
b
, Fig. 3) and input 2 (
c
, Fig. 3).
• Electric guitar usage.
To use an electric guitar, connect it to guitar input. If you use the MSS to
enhance the sound of the guitar, switch o
the Distortion module by turning drive control knob (
i
,
Fig. 2) counterclockwise until clicking position. Then adjust volume level with aux 1 knob (
k
, Fig. 2),
adjust the coloring of its sound with contour knob (
j
, Fig. 2) on the active speaker control panel.
Sample
This manual is suitable for devices