NAD T 758 user manual download (Page 8 of 44)

Languages: English
Pages:44
Description:A/V рессивер
You can view the full version and download it in PDF format.
Page 8 of 44
1
DIGITAL AUDIO IN ±COAXIAL 1-3, OPTICAL 1-3²
Connect to the corresponding optical or coaxial digital output of
sources such as CD or BD/DVD players, digital cable box, digital
tuners and other applicable components.
Coaxial and optical digital input association is configurable via the
Source Setup item of the Setup Menu OSD.
DIGITAL AUDIO OUT ±OPTICAL, COAXIAL²
Connect the optical or coaxial DIGITAL OUT to the corresponding
digital audio input of compatible devices such as receivers, computer
soundcard or other digital processors.
2
HDMI ±HDMI 1-4, HDMI MONITOR OUT²
Connect the sets of HDMI input to the HDMI OUT connectors of
source components such as DVD player, BD player or HDTV satellite/
cable box. Connect the HDMI Monitor OUT to a HDTV or projector
with HDMI input.
3
FM ANTENNA TERMINAL
Connect the supplied lead-type FM antenna to the FM antenna
input. Extend the lead. Experiment freely with your antenna
placement and orientation until you get the clearest sound and
lowest background noise.
Fix the antenna in the desired position by using thumb tacks, push
pins or any suitable means.
AM ANTENNA TERMINAL
The AM loop antenna supplied with the T 758 (or a suitable
replacement) is required for AM reception.
Open the clip terminal lever; insert the wire making sure to match
the color-coded (white and black) ends of the wire to that of the
terminal and close the lever ensuring that the lever locks the wire in
place.
Testing different positions for the antenna may improve reception;
vertical orientation will usually produce the best results. Antenna
proximity to large metal objects (appliances, radiators) may impair
reception, as well as attempts to lengthen the wire to the loop.
Refer also to the item about ASSEMBLING THE LOOP ANTENNA at
the LISTENING TO AM/FM RADIO section of the OPERATION page.
4
AUDIO 1 - 3
These comprise the T 758’s other sets of principal input. Connect these
analog audio input ports to the corresponding audio output ports of
source components such as CD players or other line level audio sources.
AUDIO 3 is the assigned default port for the audio output of the
separately sold NAD IPD (NAD IPD Dock for iPod) 1, NAD IPD 2 and
later variants.
IDENTIFICATION OF CONTROLS
REAR PANEL
© NAD
T 758
120V
60Hz 100W 1A MAX
Z
O
N
E
2
SURR-BACK/
ZONE 2
SURR-BACK/
ZONE 2
SURR-B
7.1 CH INPUT
IR IN
COMPONENT VIDEO INPUT 1
COMPONENT VIDEO INPUT 2
COMPONENT VIDEO INPUT 3
VIDEO
S-VIDEO
IR OUT
2
1
TRIG OUT
+12V
MP DOCK
DATA PORT
SWITCHED AC OUTLET
MONITOR OUT
MON. OUT
SURR-B/ZONE 2
1
2
3
4
6
7
10
9
8
11
12
16
17
5
13
14
15
ATTENTION!
Please make sure that the T 758 is powered off or unplugged from the mains power source before making any connections. It is also advisable to power
down or unplug all associated components while making or breaking any signal or AC power connections.
8
ENGLISH
PORTUGUÊS
FRANÇAIS
ESPAÑOL
ITALIANO
DEUTSCH
NEDERLANDS
SVENSKA
РУССКИЙ
Sample
This manual is suitable for devices