NAD T 758 user manual download (Page 7 of 44)

Languages: English
Pages:44
Description:A/V рессивер
You can view the full version and download it in PDF format.
Page 7 of 44
6
VACUUM FLUORESCENT DISPLAY ±VFD²
Displays visual information about the current settings like the active
Source, volume level, listening mode, audio format, applicable RDS/
DAB as well as iPod-related display information and other related
indicators.
Refer also to the item about DISPLAY SETUP under the USING THE
T 758 - SETUP MENU segment of the OPERATION section.
7
REMOTE SENSOR
Point the AVR 4 remote control at the remote sensor and press the
buttons.
Do not expose the remote sensor of the T 758 to a strong light
source such as direct sunlight or illumination. If you do so, you may
not be able to operate the T 758 with the remote control.
Distance:
About 23ft (7m) from the front of the remote sensor.
Angle:
About 30° in each direction of the front of the remote sensor.
8
3
SOURCE
4
Toggle through the input selections - Source 1, Source 2, Source 3,
Source 4, iPod, Source 7, Front Input, Media Player and Tuner (AM/
FM/DAB as applicable). More Sources can be directly recalled upon
enabling them at the Setup Menu.
Refer also to the item about SOURCE SETUP under the USING THE
T 758 - SETUP MENU segment of the OPERATION section.
9
VOLUME
The VOLUME control adjusts the overall loudness of the signal being
fed to the loudspeakers or headphones.
Turn clockwise to increase the volume level; counter clockwise to
lower it.
10 PHONES
Accepts stereo headphone using a standard 1/4-inch stereo phone
plug (use a suitable adaptor for headphones equipped with a
smaller plug).
Plugging in headphones automatically mutes output from the
speakers.
For headphone listening, the Front speakers must be set to “Large” at
the “Speaker Configuration” of the Speaker Setup item at the Setup
Menu; otherwise headphone bass response will be restricted.
Plugging in headphones will automatically switch the T 758 to
Stereo, Stereo Downmix or Analog Bypass modes.
11 FRONT INPUT PORTS
Use these convenience jacks for occasional sources such as a
camcorder, video game console, any analog audio or optical digital
audio sources and composite video sources.
If your source has two output jacks indicative of stereo output,
insert both jacks into the T 758’s corresponding Front “L” (item A) and
“R (MONO)” input to achieve stereo output as well.
On the other hand, if your source has a single audio out jack only or
is marked “Mono output”, plug this into the T 758’s Front “R (MONO)”
input (item B).
Connect composite video output source to the front composite
video input (item C).
Use the front optical audio input (item D) for optical digital audio
sources.
12 FRONT MP/MIC INPUT
Connect your Media Player’s standard stereo phone jack to this
input.
This is also the same input where the supplied Audyssey
microphone is connected for Audyssey Setup
calibration.
Refer also to the item about AUDYSSEY SETUP under the USING THE
T 758 - SETUP MENU segment of the OPERATION section.
IDENTIFICATION OF CONTROLS
FRONT PANEL
7
ENGLISH
PORTUGUÊS
FRANÇAIS
ESPAÑOL
ITALIANO
DEUTSCH
NEDERLANDS
SVENSKA
РУССКИЙ
Sample
This manual is suitable for devices