NAD T 758 user manual download (Page 5 of 44)

Languages: English
Pages:44
Description:A/V рессивер
You can view the full version and download it in PDF format.
Page 5 of 44
INTRODUCTION
GETTING STARTED
WHAT’S IN THE BOX
Packed with your T 758 you will find
AM loop antenna
FM lead-type antenna
Detachable mains power cord
Audyssey microphone
AVR 4 remote control with 2 AA batteries
ZR 7 zone remote control with 3V CR2025 battery
T 758 Quick Start Guide
SAVE THE PACKAGING
Please save the box and all of the packaging in which your T 758 arrived. Should you move or
otherwise need to transport your T 758, this is by far the safest container in which to do so. We’ve seen
too many otherwise perfect components damaged in transit for lack of a proper shipping carton, so
please:
Save that box!
INITIAL SETUP
Before you make the first connection to your T 758, you should have the arrangement of your
listening room/home theater components and furniture mapped out, at least initially. Unfortunately, a
discussion of the vital questions of loudspeaker placement and listening/viewing positions is beyond
our scope here.
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to both sides and behind), and
that will provide a clear line of sight, within 25 feet/8 meters, between the T 758’s front panel and your
primary listening/viewing position - this will ensure reliable infrared remote control communications.
The T 758 generates a modest amount of heat, but nothing that should trouble adjacent components.
It is especially important that sufficient ventilation be provided.
DEFAULT SOURCE SETTINGS
The following table lists the default SOURCE settings. Note that the Audio input settings show both
digital and analog audio input. Digital input will always take precedence over analog audio input even
if both are present.
Source
Audio Input
Video Input
Source 1
HDMI 1/ Audio 1
HDMI 1
Source 2
HDMI 2/ Audio 2
HDMI 2
Source 3
Coaxial 1
Component Video IN 1
Source 4
Optical 1
Video 1
iPod
Audio 3
S-Video 1
Source 7
7.1 Channel Input
Component Video IN 2
Front Input
Optical Front Input/ Audio Front Input
Video Front Input
Media Player
Audio Front MP
Tuner
For Video output, select the highest quality video format available on your TV/Monitor and utilize this
for your Monitor OUT connection from the T 758 to the TV/Monitor. In most cases, this would be HDMI
but for other TV/Monitor without HDMI input, the best quality connection could be Component Video,
S-Video or Composite video input.
To modify the
above default settings and for a better understanding of source setting and
combinations, please refer to the item about “SOURCE SETUP” in the “USING THE T 758 - SETUP MENU”
segment of the “OPERATION” section.
5
ENGLISH
PORTUGUÊS
FRANÇAIS
ESPAÑOL
ITALIANO
DEUTSCH
NEDERLANDS
SVENSKA
РУССКИЙ
Sample
This manual is suitable for devices