NAD T 758 user manual download (Page 36 of 44)

Languages: English
Pages:44
Description:A/V рессивер
You can view the full version and download it in PDF format.
Page 36 of 44
4
Press and hold [ENTER] button to check the strength of the incoming
signal. The more segments visible in the lower display line, the stronger
the signal. By changing the position of the antenna, you can increase
the signal strength. You can also opt for an external antenna. Consult an
antenna professional for more information.
Signal Strength
||||||||||||
NOTE
“No Service List” will also be shown in the VFD when no stations are
found after the scanning process.
If this occurs, check the connection
and position of the DAB antenna or call your local DAB broadcast
providers for coverage information.
SERVICE LIST
Follow the steps below to select through the DAB service stations found.
1
At DAB mode, press [
A/S
] to step through the list of available stations
as shown in the lower display line of the VFD.
DAB
P--
$CBC R2
%
2
Press [ENTER] to select the desired station.
DAB TUNER MODE
Aside from “Full Scan” and “Local Scan” as already described above, pressing
the [TUNER MODE] button will also present you with other options namely
- Station Order, DRC, Manual Scan, Prune List and Reset.
STATION ORDER
Use “Station Order” to sort the sequence of the listed stations. There are
three orders - Alphanumeric, Ensemble and Active.
1
While listening to a DAB broadcast, press [TUNER MODE] button and
[
A/S
] to select “Station Order”. Press [ENTER].
2
Toggle [
A/S
] to select through “Alphanumeric”, “Ensemble” and “Active”.
3
Press [ENTER] to select desired station order.
ALPHANUMERIC
This is the default setting. Stations are arranged by numbers first and then
alphabetically by letters.
ENSEMBLE
Digital radio is broadcast as groups of data called ensemble. Each ensemble
contains a number of stations, transmitted at a set frequency. When
“Ensemble” is selected as the mode of station order, the radio broadcasts are
arranged in the order of their ensemble names.
NOTE
Ensemble is also interchangeably termed as “multiplex” by other
broadcast providers.
ACTIVE
Active stations are listed at the top of the channel list.
Those channels
that are in list but have no service in the area will be displayed last in the
channel list.
DRC
The level of compression of stations can be set to eliminate the differences
in dynamic range or sound level between radio stations. Popular music
would normally be more compressed than classical music, resulting in
possible different audio levels when changing from one station to the
other. Setting the DRC to “0” means no compression, “1/2” indicates medium
compression and “1” shows maximum compression. No compression is
recommended, especially for classical music.
1
While listening to a DAB broadcast, press [TUNER MODE] button and
[
A/S
] to select “DRC”. Press [ENTER].
2
Toggle [
A/S
] to select through “DRC 0”, “DRC 1/2” and “DRC 1”.
3
Press [ENTER] to select desired DRC level.
MANUAL SCAN
This option allows you to directly tune to a desired channel and include it
in the service list (if not yet available at the time). You can also use manual
scan to assist you in positioning the DAB antenna for best reception of the
desired channel.
1
While listening to a DAB broadcast, press [TUNER MODE] button and
[
A/S
] to select “Manual Scan”. Press [ENTER]. The current channel and
frequency are shown in the upper line of the VFD.
The “bars” at the
lower line of the VFD indicate the signal strength level of the current
channel.
$LH
1464.944M%
|||||||||||
2
To select other channels, toggle [
A/S
] to step through the channel list.
Release [
A/S
] when you have arrived at your desired channel. Channel
and frequency are shown in the upper line of the VFD.
The “bars” at the
lower line of the VFD indicate the signal strength level of the current
channel.
To improve the reception of the selected channel, adjust or
reposition the DAB antenna until the best reception is indicated.
3
Press [ENTER] to tune the selected channel.
NOTE
The number of ensembles and stations that could be scanned will vary
depending upon your location.
PRUNE LIST
There maybe situations wherein certain stations become inactive.
The
“Prune List” option enables the deletion of these inactive stations in the
service list.
1
While listening to a DAB broadcast, press front panel’s [TUNER MODE]
button and [
A/S
] to select “Prune List”.
2
Press [ENTER]. Any inactive stations are automatically deleted.
OPERATION
LISTENING TO DAB RADIO
36
ENGLISH
PORTUGUÊS
FRANÇAIS
ESPAÑOL
ITALIANO
DEUTSCH
NEDERLANDS
SVENSKA
РУССКИЙ
Sample
This manual is suitable for devices