You can view the full version and download it in PDF format.
Page 20 of 44
There are three sub-menu items under Source Setup.
These are Source
Setup (Normal View), Source Setup (Table View) and iPod Setup.
SOURCE SETUP (NORMAL VIEW)
The Source Setup (Normal View) menu makes it possible to set, allocate or
change the following settings.
The T 758 is equipped with ten conﬁgurable Sources. The settings for each
Source are dependent upon the conﬁgurations set forth in the parameters
for that particular Source window.
To change or toggle through the Sources, scroll to “Source”, press [
and then ENTER or [
]to move up or down the Source selections.
Source 5 is defaulted to iPod. Remove the default setting of Source 5 to
iPod via the following procedure:
Go to “iPod Setup” menu under the “Source Setup” menu.
Setup” menu, set “Enabled” to “No”.
Then, go back to “Source Setup” menu and select “Source Setup (Normal View).
Go to Source 5 and set “Enabled” to “Yes”.
Source 5 can now be conﬁgured to any desired settings.
One can enable/disable a Source via this option. This is particularly useful
if only few Sources are used and one directly selects the Source from the
front panel, bypassing unused sources.
Select “Yes” to enable the particular Source or
“No” to disable the Source.
A new Name maybe assigned to a Source label. For example, if your BD player is
attached to “Source 1”, it is possible to rename “Source 1” to “BD Player”.
In order to rename the Source label, scroll to the “Name” parameter. Press
] to go to the ﬁrst character. Then, press [
] to pick through the
] to move to the next character and at the same time save the
changes done on the current character. The name can be as long as twelve
The new Name will be shown in the VFD as well as on the OSD.
The T 758 has six analog audio inputs including 7.1 input. These analog
inputs - Audio 1, Audio 2, Audio 3, Audio Front, Audio MP and 7.1 Input can
be variably assigned to each Source.
Scroll to “Analog Audio” and then press [
] and then [
] to select
and assign an analog audio input to the particular Source. There are three
choices - Audio, 7.1 Input or Oﬀ.
When “Audio” is chosen, press [
] and then [
] to select and assign
the desired audio input - 1 to 3, Front and MP.
Select “7.1 Input” to choose the audio signal fed to the “7.1 Channel Input”.
If “Oﬀ’ is selected, no incoming analog audio signal is selected by the
An incoming digital signal present at the assigned digital input will always
take precedence over the assigned analog audio input, even if both are
present. To maintain the analog audio input for the particular Source, select
“Oﬀ” at the “Digital Audio” setting of the same “Source” menu.
Gain adjustment allows all sources to play back at the same volume level so
you don’t need to adjust the volume every time a new source is selected. It
is generally preferable to reduce the level of the loudest source rather than
making louder the softer sources.
Scroll to “Gain”, press [
] and then [
] to step through the desired
level from -12dB to 12dB.
USING THE T 758 – SETUP MENU
This manual is suitable for devices