HP Proliant DL380 Gen9 E5-2690v3 Rack(2U)/2xXeon12C 2.6GHz(30Mb)/2x16Gb/P440arFBWC (803861-B21) user manual download

You can view the full version and download it in PDF format.
Page 43 of 47
System Unit
Dimensions
SFF Drives: 3.44 x 17.54 x 26.75 in (8.73 x 44.55 x 67.94 cm)
LFF Drives: 3.44 x 17.54 x 28.75 in (8.73 x 44.55 x 73.02 cm)
NOTE:
Dimensions without Bezel
Weight
(approximate)
Maximum:
(Minimum - 8SFF
chassis with 1xSFF HDD
and 7 HDD blanks, 1x
processor, 1x power
supply (plus blank), 1x
Flexible Smart Array, 1x
Riser installed)
32.6 lb (14.759 kg)
Minimum:
(Maximum - 12 LFF hard
drives (No rear drives),
2x processors, 2x power
supplies, 1x Flexible
Smart Array, 2x Risers
installed)
51.5 lb (23.6 kg)
Input Requirements
(per power supply)
Range Line Voltage
100 to 120 VAC
200 to 240 VAC
BTU Rating
Maximum
For 800W Power Supply: 3207 BTU/hr (at 100
VAC), 3071 BTU/hr (at 200 VAC), 3112
BTU/hr (at 240 VAC) for China Only
For 500W Power Supply: 1979 BTU/hr (at 100
VAC), 1911 BTU/hr (at 200 VAC), 1965
BTU/hr (at 240 VAC) for China Only
Power Supply Output
Rated Steady-State
Power
For 1400W Power Supply: 1400W (at 100
VAC), 1400W (at 240 VAC), 1400W (at 240
VAC)
For 800W Power Supply: 800W (at 100 VAC),
800W (at 240 VAC), 800W (at 240 VAC) input
for China only
For 500W Power Supply: 500W (at 100 VAC),
500W (at 240 VAC), 500W (at 240 VAC) input
for China only
Maximum Peak Power
For 1400W Power Supply: 1400W (at 100 to
127 VAC), 1400W (at 200 to 240 1VAC),
1400W (at 240 VAC) input for China only
For 800W Power Supply: 800W (at 100 to
127 VAC), 800W (at 200 to 240 1VAC), 800W
(at 240 VAC) input for China only
For 500W Power Supply: 500W (at 100 to
127 VAC), 500W (at 200 to 240 VAC), 500W
(at 240 VAC) input for China only
System Inlet
Temperature
Standard Operating
Support
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 20°C/hr (36°F/hr). The upper limit and rate
of change may be limited by the type and
number of options installed. For approved
hardware configurations, the supported
system inlet range is extended to be: 5° to
40°C (41° to 104°F) at sea level with an
QuickSpecs
HP ProLiant DL380 Generation9 (Gen9)
Technical Specifications
DA - 15034
Worldwide QuickSpecs — Version 1 — 9.9.2014
Page
43
Sample