HP Proliant DL180 Gen9 Rack(2U)Hot Plug /Xeon6C E5-2603v3 1.6GHz(15Mb)/1x8GbR1D_2133/B140i (778453-B21) user manual download (Page 31 of 39)

Languages: English
Pages:39
Description:Сервер
You can view the full version and download it in PDF format.
Page 31 of 39
Memory Subsystem
Architecture
Each Intel® Xeon® E5-2600v3 family processor socket contains four memory channels per
installed processor with two DIMMs per channel for a total of eight (8) DIMMs or a grand total of
sixteen (16) DIMMs for the server.
Memory Population
guidelines
General Memory Population Rules and Guidelines:
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are
available.
To maximize performance, it is recommended to balance the total memory capacity between
all installed processors and load the channels similarly whenever possible.
When two processors are installed, balance the DIMMs across the two processors.
White DIMM slots denote the first slot to be populated in a channel.
Place the DIMMs with the highest number of ranks in the white slot when mixing DIMMs of
different ranks on the same channel.
Do not mix RDIMMs or LRDIMMs.
Quad rank RDIMMs are not supported in HP ProLiant DL180 Gen9 servers.
Quad rank LRDIMMs are capable of up to two DIMMs per channel.
RDIMMs operating at either 1.35V or 1.5V may be mixed in any order, but the system will
power them at the higher voltage.
DIMMs of different speeds may be mixed in any order; the server will select a common
optimal speed.
The maximum memory speed is a function of the memory type, memory configuration, and
processor model.
The maximum memory capacity is a function of the memory type and number of installed
processors.
To realize the performance memory capabilities listed in this document, HP SmartMemory is
required.
Intel Gen9 Supported Memory Bandwidth for HP ProLiant Gen8 Intel® Xeon®E5-2600v3 Series Processor Family
QuickSpecs
HP ProLiant DL180 Generation9 (Gen9)
Memory
DA - 15032
Worldwide QuickSpecs — Version 1 — 9.9.2014
Page
31
Sample