Troybilt 41AJGC-C063 user manual download (Page 9 of 13)

Languages: English
Pages:13
You can view the full version and download it in PDF format.
Page 9 of 13
TINE
REMOVAL
AND
REPLACEMENT
All 4 tines should
be replaced
at the same time because
they will wear evenly through normal
use. Work on one
side at a time.
WARNING:
TO prevent serious personal
injury, always
wear heavy gloves when
hand
ng the tnes.
1.
Stop engine/motor
before installing
or removing
tines. Disconnect
unit from the powerhead.
2.
Remove the clevis
pin clips and clevis pins (Fig. 6).
3.
Remove the tines and felt washers
from the shaft.
4.
Clean and oil the shaft.
5.
The tines are stamped
with the letter "R" or "L" to
identified
their
position
on each side of the gearbox
when facing the front of the unit.
6.
Replace the tines and felt washers
onto the shaft with
the hubs on the tines facing each other.
7.
Ensure the tips on tines are aligned in the same
direction
with each other before reinstalling
the clevis
pins and pin clips (Fig. 7).
8.
Repeat this procedure
on the opposite
side.
NOTE:
When installed correctly,
there will be an "R" and
"L" tine on each side of the gearbox
and the tips
on the tines line up in the same direction.
It is
important
that the tines are installed correctly.
Clevis Pin
Felt Washers
Felt
Washers
L
_
Clevis Pin Clip
Fig. 6
Shaft
\,
R
Fig. 7
Align Tips
9
Sample
This manual is suitable for devices