Troybilt 41AJGC-C063 user manual download (Page 7 of 13)

Languages: English
Pages:13
You can view the full version and download it in PDF format.
Page 7 of 13
ASSEMBLING
THE
COUPLER
The following Troy-Bilt Add-Ons are also availablefor your unit:
Blower/Vacuum
...........................
TBBV
Hedge Trimmer
...........................
TBHS
Edger
...................................
TBLE
Straight
Shaft Trimmer
......................
TBSS
Snow Thrower
............................
TBST
Turbo Blower
.............................
TBTB
Tree Pruner
...............................
TBTP
_IL
WARNING:
Read and understand
operator's
manual for unit to be used with this add.on
prior to operation,
Removing
the add-on:
1.
Turn the knob counterclockwise
to loosen (Fig. 1).
2.
Press and hold the release button
(Fig. 1).
3.
While firmly holding the upper shaft housing, pull the
garden cultivator
Add-On
out of the coupler (Fig. 2).
wARN,NG:
To
avoid
serious
personal
injury
I
and
damage
to the
unit, shut
unit off before
remov
ng or
nsta
ng add-ons.
Installing
the add-on:
NOTE:
To make installing or removing the Add-On easier,
place the unit on the ground or on a work bench.
1.
Remove the hanger from the top of the shaft housing.
2.
Turn knob counterclockwise
to loosen (Fig. 1).
3.
While firmly holding the add-on,
push it straight
into
the coupler
(Fig. 2).
Cou_er
Releasex\ButtĀ°n
\
\,
Guide
Recess
Counterclockwise
Knob
Fig.
1
NOTE:
Aligning the release button
with the guide recess
will help installation
(Fig. 1).
Coupler
Release Button
_\
Primary Hole
_
/_
_
\\
J
Upper Shaft
Lower Shaft
Housing
Knob
J
Housing
Fig. 2
4.
Turn the knob clockwise
to tighten
(Fig. 3).
[_i[
cAUTION:
LOck the release buttOn in the
l
primary hole (Fig. 2) and securely
tighten the |
knob before operating
this unit.
1
_Knob
Fig. 3
CAUTION:
The add-ons
with the coupler
system
is to be used in the primary hole only.
I
Using the wrong
hole could
lead tO persona!
I
injury or damage to the Unit.
j
The cultivator
add-on
should be installed
with the release
button
in the primary
hole.
Check
Flex
Shaft
Engagement
Prior to
Using
1.
Start the unit.
2.
Briefly engage
and release the trigger.
3.
Check that add-on
is operating.
4.
If the add-on
is not operating,
remove add-on
and
repeat steps for installing
the add-on.
5.
Recheck operation
of add-on
attachment.
7
Sample
This manual is suitable for devices