Kenmore Elite 14116730900 user manual download (Page 13 of 31)

Languages: English
Pages:31
You can view the full version and download it in PDF format.
Page 13 of 31
Water
supply
and
Island Assembly.
drainage
system
for
Faucet
Operation
[]
With the water and drain pipe fitted to a suitable outlet, be
sure the water and drain inlet/outlet connection
fittings are
tightened
securely.
[]
Turn
on the
main
water
supply
line.
[]
Push
the
lever on the
Faucet
to
the
left to
release
the
water.
/
Outlets
for
Faucet
and
Drain
Pipe
For
illustration
purposes
the
left
cart
side
panel
is
not shown.
Lever
/
Proper care and maintenance
will keep your module in top oper-
ating condition
and prolong its life. Follow these cleaning proce-
dures
on a timely
basis and your module
will stay clean
and
operate with minimum effort.
Cleaning
Manufactured
Stone
Surfaces:
[]
If needed, we suggest you wash the manufactured
stone
surface using a mild soap and warm water solution only.
You can use a soft soapy cloth or sponge then rinse with
water. Never use abrasive cleaners, any cleaner contain-
ing bleach, scrubbers
or stiff wire bushes on the stone
surface.These
can cause discoloration
and/or
chipping
of the painted surface.
Cleaning
Exterior
Stainless
Steel
Surfaces:
[]
Routine care and maintenance is required to preserve the
appearance and corrosion resistance of stainless steel. The
fact is stainless steel can corrode, rust and discolor under
certain conditions. Rust is caused when regular steel par-
ticles in the atmosphere become attached to the stainless
steel surface. Steel particles can also become attached to
your module if you use steel wool or stiff wire brushes to
clean the module instead of non-abrasive cloth, sponge or
nylon cleaning tools. In coastal areas rust pits can develop
on stainless surfaces that cannot be fully removed. Bleach
and other
chlorine based solutions used for household and pool clean-
ing can also cause corrosion to stainless steel. Weather-
ing, extreme heat, smoke from cooking and machine oils
used in the manufacturing
process
of stainless steel can
cause stainless steel to turn tan in color. Although there are
many factors which can affect the surface appearance of
stainless steel, they do not affect the integrity of the steel or
the performance
of the module.
[]
1.
To help maintain the finish of stainless steel follow these
cleaning procedures
for the best results:
After every use, wipe stainless surfaces with a soft, soapy
cloth or sponge then rinse with water. Be sure to remove all
food
particles, sauces or marinades
from stainless steel
because these can be highly acidic and damaging to stain-
less surfaces.
2. Never
use
abrasive
cleaners,
scrubbers
or stiff wire
brushes of any type on your module.
3. Use a heat resistant Stainless Steel Cleaner
and rub or
wipe in the direction of the stainless steel grain or polish
lines NOT against the grain.
13
Sample