LG LSC27926SB user manual download (Page 9 of 30)

Languages: English
Pages:30
You can view the full version and download it in PDF format.
Page 9 of 30
Door replacement
Feed water tube installation
Push the refrigerator sideways through the
entrance door as shown in the right picture.
Automatic icemaker operation needs water pressure of 21.3~121psi(lb/inch
2
) (That
is, a 7oz. paper cup will be filled within 3 sec.).
If water pressure does
not reach
the
rated 21.3psi
(lb/in²
or below
)
,
it is
necessary
to purchase a separate pressure pump for normal automatic icemaking and cool
water feed.
Keep the total length of the water feed tube within 40 feet and be careful not to
bend or kink the tube. If the tube is longer than 40 feet, the icemaker and water
dispenser will not operate properly.
Install the water feed tube at a place free from heat.
Connect to potable water supply only.
Refer to instructions with water filter kit for installation.
Mount the doors in the reverse order of
removal after the refrigerator is brought to
the installation area.
Move the
Refrigerator
Before
Installation
Warning
Installation
9
Water Connection Instruction Guide
Read all directions carefully before you begin.
Connecting
the Refrigerator
to a Water Source
If operating the refrigerator before installing the water connection, turn icemaker
to the
OFF
position to prevent operation without water.
All installations must be in accordance with local plumbing code requirements.
Use copper tubing and check for leaks.
Install copper tubing only in areas where temperatures will remain above freezing.
It may take up to 24 hours for your icemaker to begin producing ice.
IMPORTANT
Standard screwdriver
7/16-inch and 1/2-inch open-end wrenches or two adjustable wrenches
1/4-inch nut driver
1/4-inch drill bit
Hand drill or electric drill (properly grounded)
Tools Required
NOTE
In order to perform the water connection you will need to buy: a 1/4-inch saddle-type
shut off valve, a union, and copper tubing. Before purchasing, make sure the saddle-type
valve complies with your local plumbing codes. Do not use a piercing-type or 3/16-inch
saddle valve which reduces water flow and clogs more easily.
Screwdriver
Adjustable wrenches
Electric drill
NOTE:
Check the direction of the lever hinge.
Correct
Incorrect
Sample
This manual is suitable for devices