LG LFX28977SB/01 user manual download (Page 9 of 44)

Languages: English
Pages:44
You can view the full version and download it in PDF format.
Page 9 of 44
INSIAllAIION
FLOORING
• To minimize
noise and vibration,
the refrigerator
MUST
be installed on a solidly constructed
floor.
• To avoid vibration, the unit must be level. If
required, adjust the leveling legs to compensate
for unevenness
of the floor. The front should be
slightly
higher than the rear to aid in door
closing. The leveling legs can be turned easily
by pushing against the top of the refrigerator
to
take the weight off the feet. Turn the leveling
legs clockwise
to raise the unit or
counterclockwise
to lower it.
• Carpeting
and soft tile surfaces
are not
recommended.
• Never install the refrigerator
on a platform or
weakly
supported
structure.
NOTE:
When moving the refrigerator
for cleaning
or service,
be sure to protect the floor. Always
pull the refrigerator
straight out when moving it.
Do not wiggle or walk the refrigerator
when trying
to move it; floor damage could occur.
NOTE:
It is recommend that the doors be removed when it is necessary
to move the refrigerator
through a
narrow opening.
HANDLE
REMOVAL
To move the refrigerator
through a house door, it
may be necessary
to remove the refrigerator
door handles.
NOTE:
Handle appearance
may vary from
illustrations
on this page.
&CAUTION
• Use special care when removing
handles to
prevent scratching
the doors.
• The handle could be damaged
if you hit it with
a hammer while removing or attaching.
• When you assemble or disassemble
a handle,
you must push or pull with reasonable force.
Mountinq
Fasteners
Set Screw
Allen
Wrench
Loosen the set screws with a 2.5 mm (3/32")
Allen wrench and remove the handle.
NOTE: If the handle mounting fasteners
need
to be tightened or removed, use a 1/4" Allen
wrench.
f
Loosen the set screws located on the lower
side of the handle with a 3.1 mm (1/8") Allen
wrench and remove the handle.
NOTE: If the handle mounting fasteners
need
to be tightened or removed, use a 1/4" Allen
wrench.
9
Sample