KitchenAid KBCO24LSBX04 user manual download (Page 8 of 32)

Languages: English
Pages:32
You can view the full version and download it in PDF format.
Page 8 of 32
BEVERAGE CENTER CARE
Explosion
Hazard
Use nonflammable
cleaner.
Failure
to do
so
can
result
in
death,
explosion,
or fire.
Clean the beverage center about
once a month to prevent
odors
from building
up. Wipe up spills immediately.
To clean your
beverage
center:
1.
Unplug beverage
center or disconnect
power.
2.
Remove all racks and shelves from inside the beverage
center.
3.
Hand wash, rinse, and dry removable
parts and interior
surfaces thoroughly.
Use a clean sponge
or soft cloth and a
mild detergent
in warm water.
To protect
wood
trim pieces, do not immerse the entire
rack into water when cleaning.
Do not use abrasive
or harsh cleaners such as window
sprays,
scouring
cleansers,
flammable
fluids,
cleaning
waxes,
concentrated
detergents,
bleaches
or cleansers
containing
petroleum
products
on plastic parts,
interior
and door liners or gaskets.
Do not use paper towels,
scouring
pads, or other harsh cleaning
tools. These can
scratch
or damage
materials.
To help remove odors, you can wash interior walls with a
mixture
of warm water and baking soda (2 tbs to 1 qt
[26 g to 0.95 L] of water).
4.
Wash stainless
steel and painted
metal exteriors
with
a clean
sponge or soft cloth and a mild detergent
in warm water. Do
not use abrasive
or harsh cleaners,
or cleaners
containing
chlorine. These can scratch
or damage
materials.
Dry
thoroughly
with a soft cloth.
For additional
protection
against
damage
to painted metal exteriors,
apply appliance
wax (or
auto paste wax) with a clean, soft cloth.
Do not wax plastic
parts.
NOTE: To keep your stainless
steel beverage
center looking
like new and to remove
minor scuffs
or marks,
it is suggested
that you use the manufacturer's
approved
Stainless
Steel
Cleaner & Polish. To order the cleaner, see "Accessories."
IMPORTANT:
This cleaner is for stainless
steel parts only?
Do not allow the Stainless
Steel Cleaner & Polish to come into
contact
with any plastic
parts such as the trim pieces,
dispenser
covers or door gaskets.
If accidental
contact
does
occur, clean plastic
part with a sponge and mild detergent
in
warm water. Dry thoroughly
with a soft cloth.
5.
Replace the racks
and shelves.
6.
Clean the condenser
coils regularly. They are located
behind
the base grille. Coils may need to be cleaned
as often as
every other month. This may help save energy.
Remove the base grille. See "Base
Grille."
Use a vacuum
cleaner with an extended
attachment
to
clean the condenser
coils when they are dusty or dirty.
Replace the base grille.
7.
Plug in beverage
center or reconnect
power.
NOTE: Not all appliance
bulbs will fit your beverage center. Be
sure to replace the bulb with one of the same size, shape,
and
wattage.
To change
the
light bulb:
1.
Unplug
beverage center or disconnect
power.
2.
Using a Phillips screwdriver,
remove the screw located
at the
back of the light shield.
Pull the light shield back to remove
the tabs from the appliance.
Remove the light shield.
A. Light
shield
B. Tabs
C. Screw
3.
Replace the bulb.
4.
Reinstall the light shield by inserting the tabs. Align the holes
and insert the screw. Tighten
the screw.
5.
Plug in beverage
center or reconnect
power.
Vacations
If you choose
to turn the beverage center off before you leave,
follow these steps.
1.
Remove
all wine bottles
from the beverage
center.
2.
Unplug the beverage center.
3.
Clean the beverage center. See "Cleaning."
4.
Tape a rubber
or wood
block to the top of the door to prop it
open far enough for air to get in. This stops
odor and mold
from building
up.
Sample