KitchenAid KBCO24LSBX04 user manual download (Page 7 of 32)

Languages: English
Pages:32
You can view the full version and download it in PDF format.
Page 7 of 32
2=
Replace the rack by inserting the rack into the supports
and
sliding
it toward
the rear of the beverage center.
\
\
\
\
To
Remove
and
Replace
the
Bottom
Rack
1.
Lift the rack (front and back) up and pull straight
out to
remove.
2.
Replace the rack by pushing
it straight
back and over the
stop. Continue
pushing the rack straight
back and evenly
until it is in place.
NOTE: For optimum
beverage and wine storage,
place white
wines at the top
of the beverage
center in the wine rack. Place
red wines at the bottom.
To
Stock
the Beverage
Center
1.
Start stocking
the beverage center with the bottom
display
rack.
2.
Starting
on the left-hand
side, place the first bottle of wine on
the bottom
of the rack with the neck of the bottle facing
the
back of the beverage center.
3=
Place the next bottle on its side with the neck of the bottle
facing the front of the beverage center.
4.
Alternate
in this manner
until the display
rack is full.
5.
Pull the next rack forward.
6.
Starting
on the left-hand
side, place the first bottle on the
rack with the neck of the bottle
facing forward.
7.
Place the next bottle on the shelf with the neck of the bottle
facing the rear of the beverage center.
8.
Continue
alternating
in this manner
until the rack is full.
9.
Slide the rack into place and continue
stocking
each
remaining
rack as described
above.
10. Place juices,
sodas or other canned beverages
on the glass
shelves.
\
................
,._
,'o_
........
![_@ยข..@I
The beverage
center has an interior light that comes
on any time
the door is opened.
You may also turn the light on at any time by
opening the door and pressing the exterior
switch
located
beside
the temperature
control
knob on the base grille.
NOTE: Leaving the light on for an extended
period of time will
slightly
increase the temperature
of the beverage center.
Sample