KitchenAid KBCA06XPBL01 user manual download (Page 9 of 24)

Languages: English
Pages:24
You can view the full version and download it in PDF format.
Page 9 of 24
REFRIGERATOR CARE
Explosion
Hazard
Use nonflammable
cleaner.
Failure
to
do so
can
result
in
death,
explosion,
or fire.
Clean the refrigerator
about
once a month to prevent
odors from
building
up. Wipe
up spills immediately.
To clean your refrigerator:
1.
Unplug refrigerator
or disconnect
power.
2.
Remove all removable
parts from inside, such as shelves, etc.
3.
Hand wash, rinse, and dry removable
parts and interior
surfaces thoroughly.
Use a clean sponge
or soft cloth and a
mild detergent
in warm water.
Do not use abrasive
or harsh cleaners such as window
sprays,
scouring
cleansers,
flammable
fluids,
cleaning
waxes,
concentrated
detergents,
bleaches
or cleansers
containing
petroleum
products
on plastic parts,
interior
and door liners or gaskets.
Do not use paper towels,
scouring
pads, or other harsh cleaning
tools. These can
scratch
or damage
materials.
To help remove odors, you can wash interior walls with a
mixture
of warm water and baking soda (2 tbs. to 1 qt.
[26 g to 0.95 L] of water).
4.
Wash exterior with
a clean sponge or soft cloth and a mild
detergent
in warm water. Do not use abrasive or harsh
cleaners.
Dry thoroughly
with a soft cloth.
To keep your stainless
steel refrigerator
looking
like new
and to remove
minor scuffs or marks, it is suggested
that
you use the manufacturer's
approved
Stainless
Steel
Cleaner & Polish. To order the cleaner, see the
"Accessories"
section.
IMPORTANT:
This cleaner is for stainless
steel parts only?
Do not allow the Stainless Steel Cleaner & Polish to come
into contact
with any plastic parts such as the trim pieces
or door gaskets.
If accidental
contact
does occur, clean
plastic
part with
a sponge and mild detergent
in warm
water. Dry thoroughly
with a soft cloth.
5.
Replace the removable
parts.
6.
Clean the condenser
coils regularly. They are located
behind
the base grille. Coils may need to be cleaned
as often as
every other month. This may help save energy.
Remove the base grille. See "Base Grille."
Use a vacuum
cleaner with an extended
attachment
to
clean the condenser
coils when they are dusty or dirty.
Replace the base grille.
7.
Plug in refrigerator
or reconnect
power.
.......
_:.;_ _,-,_
.........
_._
NOTE:
Not all appliance
bulbs will fit your refrigerator.
Be sure to
replace the bulb with one of the same size, shape, and wattage.
To change
the
light
bulb:
1.
Unplug
refrigerator
or disconnect
power.
2.
Slide the light shield towards
the tab.
3.
Press the tab down and lift the opposite
end of the light
shield up.
4.
Replace the bulb,
5.
Reinstall the light shield by inserting the tab end first. Then
lower the light shield until it clicks into place.
A. Tab
6.
Plug in refrigerator
or reconnect
power.
Vacations
If you choose
to leave the refrigerator
on while you're away, use
up any perishables
and freeze other items.
If you choose
to turn the refrigerator
off before you leave, follow
these steps.
1.
Remove
all food from the refrigerator.
2.
Unplug the refrigerator.
3.
Clean the refrigerator.
See "Cleaning."
4.
Tape a rubber
or wood
block to the top of the door to prop it
open far enough for air to get in. This stops
odor and mold
from building
up.
Moving
When you are moving your refrigerator
to a new home, follow
these steps
to prepare
it for the move.
1.
Remove
all food from the refrigerator.
2.
Unplug the refrigerator.
3.
Clean, wipe, and dry it thoroughly.
4.
Take out all removable
parts,
wrap them well, and tape them
together
so they don't
shift and rattle during the move.
5.
Tape the doors shut and tape the power
cord to the back of
the refrigerator.
When you get to your new home, put everything
back and refer to
the "Installation
Instructions"
section for preparation
instructions.
Sample