KitchenAid KBCA06XPBL01 user manual download (Page 5 of 24)

Languages: English
Pages:24
You can view the full version and download it in PDF format.
Page 5 of 24
Excessive
Weight
Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
Remove the Packaging
Remove tape and glue residue from
surfaces before turning
on the refrigerator.
Rub a small amount
of liquid dish soap
over the adhesive
with your fingers.
Wipe with warm water
and dry.
Do not use sharp instruments,
rubbing
alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products
can damage
the surface of your refrigerator.
For
more information,
see "Refrigerator
Safety."
Properly
dispose
of packaging.
When
Moving
Your
Refrigerator:
Your refrigerator
is heavy. When moving the refrigerator
for cleaning
or service,
be sure to protect
the floor.
Always
pull the refrigerator
straight out when moving
it.
Do not wiggle
or "walk"
the refrigerator
when trying to move
it, as floor damage
could
occur.
Clean Before Using
After you remove all of the packaging
materials,
clean the inside
of your refrigerator
before using it. See the cleaning
instructions
in "Refrigerator
Care."
Important
information
to know
about
glass
shelves
and
covers:
Do not clean glass shelves or covers with warm water when
they
are cold. Shelves and covers may break if exposed
to
sudden temperature
changes
or impact,
such as bumping.
For your protection,
tempered
glass is designed
to shatter
into many small, pebble-size
pieces. This is normal. Glass
shelves
and covers are heavy. Use special
care when
removing
them to avoid
impact from dropping.
1=
2.
3=
4=
5.
&
Unplug
refrigerator
or disconnect
power.
Remove three screw
plugs (at top and bottom
of refrigerator)
from the new hinge locations
on the refrigerator
cabinet.
Do
not discard
the screw plugs.
A. Screw plugs
With a 7/e4"Allen wrench,
remove the top
hinge pin and set
aside.
Tilt the door forward
and lift it off the bottom
hinge pin. Set
the door aside.
Remove the three hinge screws from the top
hinge and
remove the hinge.
A
A. Hinge
screws
B. Hinge pin hole
6.
Reinsert the hinge pin into the hinge pin hole and turn the
hinge upside down
so that the hinge pin points
up.
7.
Install the hinge on the bottom
opposite
side of the
refrigerator
using the three hinge screws.
Sample