KitchenAid KBBL206EPA00 user manual download (Page 6 of 52)

Languages: English
Pages:52
You can view the full version and download it in PDF format.
Page 6 of 52
Turn Power
On or Off:
1.
Remove top
grille.
2.
Press power switch
to the On or Off position.
3.
Replace top grille.
IMPORTANT:
Be sure the power switch
is set to the On position
after cleaning
refrigerator
or changing
light bulbs.
Viewing
the Celsius
Temperatures
Press °C touch pad. To redisplay
degrees Fahrenheit, press °C
again.
/
/
[]
J
A. Power
switch
Using the Contro)s
IM PORTANT:
----A
The refrigerator
control
adjusts the refrigerator
compartment
temperature.
The freezer control
adjusts the freezer
compartment
temperature.
Wait 24 hours after you turn on the refrigerator
before you put
food into it. If you add food
before the refrigerator
has cooled
completely,
your food may spoil.
NOTE:
Adjusting
the refrigerator
and freezer controls
to a
lower (colder) setting will not cool the compartments
any
faster.
If the temperature
is too warm or too cold in the refrigerator
or
freezer, first check
the air vents to be sure they are not
blocked
before adjusting
the controls.
The preset settings should
be correct for normal household
usage. The controls
are set correctly
when milk or juice is as
cold as you like and when
ice cream
is firm.
The actual temperature
may differ from the display when
a
door is open for an extended
period of time.
NOTE:
The factory
recommended
set points are 0°F (-18°C) for
the freezer and 37°F (3°C) for the refrigerator.
Turning Refrigerator On and
Viewing
Set Points
Press the Cooling
(ON/OFF) touch pad.
NOTE:
COOLING
After the refrigerator
is turned
on, the Over Temperature
audio
alarm and indicator
light may activate every 11/2hours until the
refrigerator
and freezer temperatures
are below 48°F (9°C) and
15°F (-9°C), respectively,
or until the alarm is turned
off. To
turn off the audio alarm and indicator
light, see "Master Alarm
Reset."
The ON/OFF
touch pad on the control
panel shuts down
refrigerator
functions
such as cooling,
lighting, fans and
compressors.
To turn the power off completely,
use the power
ON/OFF
switch
located
behind the top grille. See "Power On/
Off Switch."
NOTE:
If the freezer temperature
is below zero, the negative sign
next to the freezer display
will light up. This is normal.
Adjusting Controls
NOTE:
Wait at least 24 hours between
adjustments.
Recheck the
temperatures
before other adjustments
are made.
To Adjust
Set
Point
Temperatures:
Press the refrigerator
or freezer PLUS (+) or MINUS (-) touch
pad until the desired temperature
is reached.
Set
to
R
.......
ded
(
Freezer
_'_[
Re{rigerator
.......................................................................................................................................................
TEMPERATURE
CONTROL
Press the Set To Recommended
touch pad to reset the set
points to the factory
recommended
temperatures.
NOTE: The set point range for the freezer is -5°F to 5°F
(-21 °C to -15°C). The set point range for the refrigerator
is
33°F to 45°F (0°C to 7°C).
CONDITION/REASON:
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold
REFRIGERATOR Control 1o
Not set correctly
for conditions
higher
REFRIGERATOR too warm
REFRIGERATOR Control 1°
lower
High use or room very warm
FREEZER too cold
FREEZER Control
1° higher
Not set correctly
for conditions
FREEZER too warm/too
little
FREEZER Control
1° lower
ice
High use or heavy ice use
Water
Filter Indicator
and
Reset
See "Water
Filter Indicator"
in the "Water
Filtration System"
section.
Max
Cool
The Max Cool feature
assists with periods of heavy ice usage, full
grocery
loads, or temporarily
warm room temperatures.
Press MAX COOL to turn on the Max Cool feature.
The Max
Cool indicator
light will remain on for 24 hours unless manually
turned off.
Max
Cool
NOTE: The temperature
display
will remain at 34°F (1°C) and -5°F
(-21 °C) for the refrigerator
and freezer compartments,
respectively,
while the Max Cool feature is enabled. After
24 hours, the refrigerator
returns to the previous temperature
set
points.
6
Sample