KitchenAid KBBL206EPA00 user manual download (Page 11 of 52)

Languages: English
Pages:52
You can view the full version and download it in PDF format.
Page 11 of 52
REFRIGERATOR CARE
Explosion
Hazard
Use
nonflammable
cleaner.
Failure
to
do so can
result
in death,
explosion,
or fire.
Stainless
steel
panels:
Wash stainless
steel with a clean
sponge or soft cloth and a mild detergent
in warm water.
To keep your stainless
steel refrigerator
looking like new
and to remove minor scuffs or marks, it is suggested
that
you use the manufacturer's
approved
Stainless
Steel
Cleaner and Polish.
IMPORTANT:
This cleaner is for Stainless
Steel parts only!
Do not allow the Stainless
Steel Cleaner and Polish to come
into contact
with
any plastic parts such as the trim pieces,
dispenser
covers or door gaskets.
If unintentional
contact
does occur, clean plastic part with a sponge
and mild
detergent
in warm water. Dry thoroughly
with a soft cloth. To
order the cleaner, see "Accessories."
6.
Press the power switch
to ON.
7.
Replace the top grille. See "Power
On/Off Switch."
Both the refrigerator
and freezer sections
defrost automatically.
However, clean both sections about
once a month to avoid
buildup
of odors. Wipe up spills immediately.
To Clean
Your
Refrigerator:
1.
Remove the top
grille. See "Power On/Off Switch."
2.
Press power switch
to OFF.
3.
Remove all removable
parts from inside, such as shelves,
crispers,
etc.
4.
Hand wash, rinse, and dry removable
parts and interior
surfaces thoroughly.
Use a clean sponge or soft cloth and a
mild detergent
in warm water.
Do not use abrasive or harsh cleaners such as window
sprays, scouring
cleansers,
flammable
fluids, cleaning
waxes, concentrated
detergents,
bleaches
or cleansers
containing
petroleum
products
on plastic
parts, interior
and door liners or gaskets.
Do not use paper towels,
scouring
pads, or other harsh cleaning tools. These can
scratch
or damage
materials.
To help remove odors, you can wash interior walls with
a
mixture
of warm water and baking soda (2 tbs to 1 qt
[26 g to 0.95 L] of water).
5.
Clean the exterior
surfaces.
Broken Glass Hazard
Do not hit refrigerator
glass doors.
Protect glass surface and edges during
installation
or
removal of doors.
Failure to do so can result in serious eye injury or
minor cuts.
Glass door
panels:
Wash glass door panels with a clean
sponge or soft cloth and a mild detergent
in warm water.
NOTE: Do not hit the glass with
pots, pans, furniture,
toys, or
other objects.
Scratching,
hitting, jarring or stressing
the glass
may weaken
its structure,
causing
an increased
likelihood
of
breakage at a later date.
Changngthe
Lght
Bu(bs
NOTE: Not all appliance
bulbs will fit your refrigerator.
Be sure to
replace the bulb with one of the same size and shape. The lights
require a 40-watt
maximum
appliance
bulb. Replacement
bulbs
are available from your dealer.
Refrigerator Lights
There are three light bulbs located
in the top front
of the
refrigerator
compartment
behind
a light shield.
1.
Remove the top grille. See "Power On/Off Switch."
2.
Press power switch
to the Off position.
3.
Open the light shield.
Grasp the light shield by the openings.
Gently
push back and pull down, as shown, to access the
light bulbs.
A. Light shield
4.
Remove the light bulb and replace it with
one of the same
size, shape and wattage.
5.
Close the light shield
by raising it up into place.
NOTE: If needed, clean the light shield with a damp soft cloth.
6.
Press the power switch
to the On position.
7.
Replace the top grille. See "Power
On/Off Switch."
Freezer Lights
There are two light bulbs
located
in the top of the freezer
compartment.
One bulb is over the ice bin, and the other bulb is
over the freezer pan.
1.
Slide open the ice bin or freezer pan to access
the light bulb.
2.
Remove the light bulb and replace it with
one of the same
size, shape and wattage.
A
A. Light bulbs
11
Sample