Kenmore 10641012100 user manual download (Page 12 of 52)

Languages: English
Pages:52
You can view the full version and download it in PDF format.
Page 12 of 52
3=
Drop-in
Door Rails
To
remove
and
replace
the rails:
1.
Remove the rails by pulling straight
up on each end of the rail.
2.
Replace the rails by sliding the shelf rail into the slots on the
door and pushing
the rail straight
down
until it stops.
and [}ee B ns
(o_ some mode/sll
NOTE:
Can racks
may be purchased
as an Accessory
for some
models.
To remove
and
replace
the racks/bins:
1.
Remove the
rack/bin
by
lifting it
and pulling
it
straight
out.
2.
Replace the
rack/bin
by sliding
it in
above
the
desired
support
and pushing
it down
until it stops.
Explosion
Hazard
Use nonflammable
cleaner.
Failure to do so can result in death, explosion,
or fire.
Both the refrigerator
and freezer sections
defrost automatically.
However, clean both sections
about once a month to prevent
odors
from building
up. Wipe up spills immediately.
Cleaning
your refrigerator
1.
Unplug
refrigerator
or disconnect
power.
2.
Remove all removable
parts from
inside, such as shelves,
crispers,
etc.
4=
5=
Hand wash,
rinse, and dry removable
parts and interior
surfaces
thoroughly.
Use a clean sponge
or soft cloth and a
mild detergent
in warm water.
Do not use abrasive or harsh cleaners
such as window
sprays,
scouring
cleansers,
flammable
fluids,
cleaning
waxes,
concentrated
detergents,
bleaches
or cleansers
containing
petroleum
products
on plastic parts,
interior
and door liners or gaskets.
Do not use paper towels,
scouring
pads, or other harsh cleaning
tools.
These can
scratch
or damage
materials.
To help remove odors, you can wash interior walls with a
mixture
of warm water and baking
soda (2 tbs. to 1 qt.
[26 g to .95 L] of water).
Wash stainless
steel and painted metal exteriors
with a clean
sponge
or soft cloth and a mild detergent
in warm water. Do
not use abrasive or harsh cleaners.
Dry thoroughly
with a soft
cloth.
For additional
protection
against
damage
to painted
metal exteriors,
apply
appliance
wax (or auto paste wax) with
a clean, soft cloth.
Do not wax plastic
parts.
NOTE: To keep your Stainless
Steel refrigerator
looking like
new and to remove minor scuffs or marks, it is suggested
that
you use the manufacturer's
approved
Stainless
Steel Cleaner
& Polish.
IMPORTANT:
This cleaner is for Stainless
Steel parts only!
Do not allow the Stainless Steel Cleaner & Polish to come into
contact
with any plastic
parts such as the trim pieces,
dispenser
covers or door gaskets.
If accidental
contact
does
occur, clean plastic
part with
a sponge and mild detergent
in
warm water. Dry thoroughly
with a soft cloth.
To order the
cleaner, see the "Accessories"
section.
There is no need for routine condenser
cleaning
in normal
home operating
environments.
If the environment
is
particularly
greasy or dusty, or there is significant
pet traffic in
the home, the condenser
should
be cleaned
every two to
three months to ensure maximum
efficiency.
If you need to clean the condenser:
Remove the base grille (see "Base Grille" or "Door
Removal"
section).
Use a vacuum
with a soft brush to clean the grille, the
open areas behind the grille and the front surface area of
the condenser.
Replace the base grille when finished.
6.
Plug in refrigerator
or reconnect
power.
Changing the Light Buttbs
NOTE:
Not all appliance
bulbs will fit your refrigerator,
Be sure to
replace the bulb with
one of the same size and shape, The
dispenser
light requires a heavy duty
10-watt
bulb, All other lights
require a 40-watt
appliance
bulb, Replacement
bulbs are
available from your dealer,
1.
Unplug
refrigerator
or disconnect
power,
2.
Remove light shield when
applicable
as shown.
NOTE: To clean the light shield,
wash it with warm water and
liquid detergent.
Rinse and dry the shield well.
3.
Remove light bulb and replace with one of the same size,
shape and wattage.
4.
Replace light shield when applicable
as shown.
5.
Plug in refrigerator
or reconnect
power.
12
Sample