Kenmore 10631400200 user manual download (Page 16 of 24)

Languages: English
Pages:24
You can view the full version and download it in PDF format.
Page 16 of 24
Style 1
To remove the plastic cover:
1.
Remove crisper(s).
2.
Lift cover front
and
remove the cover support.
3.
Lift cover up
and
slide out.
Style 2
To
remove the glass cover:
1.
Pull the glass straight out.
2.
Replace in reverse order.
To replace the cover:
1.
Fit cover tabs into lowest
cabinet slots and push in.
Lower the front retainers
into place.
2.
Insert cover support
(with the long tab toward
the front)
into the groove on the underside of the cover,
NOTE: If the support
needs adjustment,
turn base
clockwise
to raise or counter-clockwise
to lower,
v-"_
.'"_
O_;;I
;;;
PD
To turn
the ice
maker on:
The on/off switch for the ice maker is a wire shut-off
arm
located on the side of the ice maker.
1.
Lower the wire shut-off
arm.
\
2.
Listen for the sound of water filling and ice dropping
into the bucket.
NOTE:
The ice maker will not make ice until the freezer is
cold enough.
3.
Allow 24 hours to produce the first batch of ice. The ice
maker should make 7 to 9 batches of ice in a 24-hour
period, Discard the first three batches of ice produced.
To
turn
the
ice
maker off:
1.
Automatic
turn off: As ice is made, the ice cubes will fill
the ice storage bin, and the ice cubes will raise the wire
shut-off
arm to the OFF (arm up) position.
2.
Manual turn off: Lift the wire shut-off
arm to the OFF
(arm up) position
and listen for the click to make sure
the ice maker will not continue
to operate
REMEMBER:
Allow
24 hours to produce the first batch of ice.
Discard the first three batches of ice produce to avoid
impurities
that may be flushed
out of the system.
The quality of your ice will be only as good as the
quality
of the water supplied to your ice maker,
Avoid connecting
the ice maker to a softened water
supply. Water softener chemicals
(such as salt) can
damage
parts of the ice maker and lead to poor quality
ice, If a softened
water supply cannot
be avoided,
make sure the water softener is operating
properly and
is well maintained,
It is normal for the ice cubes to be attached
at the
corners.
They will break apart easily.
Do not force the wire shut-off
arm up or down.
Do not store anything
on top of the ice maker or in the
ice storage
bin.
16
Sample