Jenn-Air JCB2280HEB user manual download (Page 8 of 33)

Languages: English
Pages:33
You can view the full version and download it in PDF format.
Page 8 of 33
To enhance
the appearance
and maintain
performance
the refrigerator
should
be level.
Note
• Complete
any required
door
reversal,
panel
installation
and/or
a water
supply
connection,
before
leveling.
Materials
Needed
• 3/8"hex head driver
• Carpenter's
level
1. Remove
toe grille.
• Grasp firmly
and pull
bottom
outward
to
unclip.
2. Remove
bottom
hinge
cover(s).
• Place the eraser
end of a pencil or similar
blunt
tool in the cover
notch.
Notch
Location
• Use slight
pressure
to pry the
cover
loose.
• Continue
to maintain
downward
pressure
to the
notched
side of the cover while
swinging
it off.
3. Using
hex head driver, turn
both of the front
adjustment
screws
(A) clockwise
to raise and
counterclockwise
to lower
the front
of the
refrigerator.
.
.
Turn both rear adjustment
screws
(B) clockwise
to
raise and counterclockwise
to lower
the rear of the
refrigerator.
Using the carpenter's
level, make sure front
of
refrigerator
is '/4" (6 ram) or '/2bubble
higher
than
back of refrigerator
and that the refrigerator
is level
from
side to side.
.
If required,
correct
rocking
of refrigerator
by
turning
rear adjustment
screw
clockwise
to raise
rocking
corner.
If doors are uneven, do the
following:
Determine
which
door
needs to be
raised.
Turn front
roller
adjustment
screw
(A)
clockwise
to raise
front
corner
of door.
O t
If one refrigerator
door
has reached
the limit of
its adjustment
range
and doors
are still
not level,
lower the opposite
door
by turning
roller
adjustment
screw
counterclockwise.
• Check
with
level to verify
'/4" tilt to the
back for
proper
door closure.
If refrigerator
is aligned
and stable,
replace toe
grille
and hinge
covers.
7. Replace
hinge cover(s).
Position cover
into the outer
edge of the hinge.
• Swing
the cover toward
the cabinet
and snap it
into place.
8. Replace the toe grille.
Note
• For proper
reinstallation,
ensure
the "top"
marking
on the interior
of the toe grille
is oriented
correctly.
• Align
the toe grille
mounting
clips with
the lower
cabinet
slots.
Push the toe grille firmly
until
it snaps into place.
Sample