Jenn-Air JCB2280HEB user manual download (Page 14 of 33)

Languages: English
Pages:33
You can view the full version and download it in PDF format.
Page 14 of 33
C
Automatic
ice
Maker
(select
modds)
Energy rating
guides
that are posted
on the
refrigerator
at the time
of purchase
do not include
optional
ice maker
energy
usage.
Some models
are automatic
ice maker
ready. The
number
of the appropriate
ice maker
kit is ICIOS. The
kit contains
installation
instructions
and water
connection
instructions.
Other models
have a factory
installed
ice maker.
Connect
the ice maker
to the water
supply
as
instructed
on page 5. Proper
water
flow
and
a level
refrigerator
are essential
for
optimal
ice
maker
performance.
Operating
Instructions
• Confirm
ice bin is in place and ice maker
arm is
down.
• To check the ice level or gain
access to the ice bin, lift open the
door on the ice bin.
After
freezer section
reaches
between
0° to 2° F (-18 ° to -17 ° C),
ice maker fills with
water
and
begins
operating.
You will
have a complete
harvest
of
ice approximately
every three
hours.
Allow
approximately
24 hours after
installation
to
receive
first
harvest
of ice.
Discard
ice created
within
first
12 hours of operation
to verify
system
is flushed
of impurities.
Stop ice production
by raising
ice maker
arm until
click
is heard.
Ice maker will
remain
in the OFF position
until
arm
is
pushed
down.
The first
one or two
batches
will
probably
contain
undersized
and irregular
cubes
because
of air in the
supply
line.
When the ice cubes
are ejected
it is normal
for
several cubes
to be joined
together
at the ends. They
can easily be broken
apart. The ice maker will
continue
to make ice until
the supply
of ice cubes
raises the ice maker
arm, shutting
the ice maker
off.
Certain
sounds
may accompany
the various
cycles
of
the ice maker. The motor
may have a slight
hum, the
cubes will
rattle as they fall into an empty
storage
pan and the water
valve may click
or "buzz"
occasionally.
If the ice is not used frequently,
the ice cubes will
become
cloudy, shrink,
stick together
and taste stale.
Empty the ice storage
bin periodically
and wash
it in
lukewarm
water.
Be sure to dry the bin thoroughly
before
replacing
it.
Beverages
and foods should
not be placed
in the ice
storage
bin for quick
chilling.
These items
can block
the ice maker arm, causing
the ice maker
to
malfunction.
• Turn off the ice maker
by raising
the ice maker
arm
when
the water
supply
is to be shut off for several
hours.
To Remove
the
Ice Bin:
• Pull it forward,
away from the ice maker. To avoid the
ice maker
dumping
ice while
the bin is removed, turn
the ice maker off by raising
the sensor
arm.
To Install
the
Ice Bin:
• Reverse the above procedure.
Turn the ice maker
on
by lowering
the ice maker
arm.
Sample