Jenn-Air JB36NXFXLW00 user manual download (Page 6 of 52)

Languages: English
Pages:52
You can view the full version and download it in PDF format.
Page 6 of 52
lJs
he Contss s
IMPORTANT:
Wait 24 hours after you turn on the refrigerator
before you put
food into it. If you add food
before the refrigerator
has cooled
completely,
your food may spoil.
NOTE: Adjusting
the refrigerator
and freezer controls
to a
lower (colder) setting
will not cool the compartments
any
faster.
To
Adjust
Set
Point
Temperatures:
The set point range for the freezer is -5°F to 5°F (-21°C to -15°C).
The set point range for the refrigerator
is 33°F to 45°F
(0°C to 7°C).
Press the refrigerator
or freezer PLUS (+) or MINUS (-) touch
pad until the desired temperature
is reached.
If the temperature
is too warm or too cold in the refrigerator
or
freezer, first check the air vents to be sure they are not
blocked
before adjusting
the controls.
After the refrigerator
is turned
on, the Over Temperature
audio
alarm and indicator
light may activate
every 1
V2
hours until
the refrigerator
and freezer temperatures
are below 48°F (9°C)
and 15°F (-9°C), respectively,
or until the alarm is turned
off.
To turn off the audio alarm and indicator
light, see "Master
Alarm Reset."
Turning Refrigerator
On/Off and
Viewing
Set
Points
The On/Off touch pad on the control
panel shuts down
refrigerator
functions
such as cooling,
some lighting,
fans and
compressors.
To turn the power off completely,
use the power
On/Off switch
located
behind
the top grille. See "Power
On/Off
Switch."
Press the On/Off touch
pad.
Viewing
the
Celsius
Temperatures
Press F/C touch
pad. To redisplay
degrees
Fahrenheit,
press
F/C again.
NOTE: If the freezer temperature
is below zero, the negative
sign next to the freezer display
will light up. This is normal.
Adjusting
Controls
IMPORTANT:
The preset settings
should
be correct for normal household
usage. The controls
are set correctly
when
milk or juice is as
cold as you like and when
ice cream is firm.
NOTE: Wait at least 24 hours between
adjustments.
Recheck
the temperatures
before other adjustments
are made.
Press the SET TO RECOMMENDED
touch pad to reset the
set points to the factory
recommended
temperatures.
NOTE: The factory
recommended
set points
are 0°F (-18°C)
for the freezer and 37°F (2°C) for the refrigerator.
The actual temperature
may differ from the display
when a
door is open for an extended
period of time.
r,_l
o,F
.18,c
SE] TO RECOMMENDEDEL1
57
F
3"C
F_
1
FI
........
[]
........
F-I
CONDITION/REASON:
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR
too cold
REFRIGERATOR Control
Not set correctly
for conditions
1o higher
REFRIGERATOR
too warm
REFRIGERATOR Control
1o lower
High use or room very warm
FREEZER too cold
FREEZER Control
Not set correctly
for conditions
1o higher
FREEZER too warm/too
little ice
FREEZER Control
1o lower
High use or heavy ice use
Alarm
Functions
Master
Alarm
Reset
Pressing
Alarm Reset once will turn off the audio alarm and
indicator
light. The audio alarm will not sound
again for the
current
condition
that caused
the alarm until a new condition
occurs
or until a Master Alarm Reset is performed.
A Master Alarm
Reset can be performed
by pressing ON/OFF
twice
or by turning
the power to the refrigerator
off and on again.
See "Power
On/Off Switch."
After performing
a Master Alarm
Reset, the indicator
light will reactivate
if the condition
that
caused
the alarm is still present.
See "Over Temperature,"
"Call
Service,"
or "Door Alarm."
Door Alarm _£
Over T_mp Alarm
@
Door
Alarm
The Door Alarm
indicator
light will flash,
an alarm will sound
and
the interior
lights will turn off when a door
has been open for
longer than 10 minutes.
When the door is closed, the audio alarm
will reset and turn off, but the Door Alarm
indicator
light will
continue
to flash until the temperature
is equal to or below 45°F
(7°C) and 15°F (-9°C) for the refrigerator
and freezer
compartments,
respectively.
NOTE: To deactivate
the audio alarm and indicator
light, see
"Master
Alarm Reset."
6
Sample