Jenn-Air JB36NXFXLW00 user manual download (Page 4 of 52)

Languages: English
Pages:52
You can view the full version and download it in PDF format.
Page 4 of 52
BEFORE
USE
Pinch Hazard
Installation
of door panels with less than a 3/8"(0.95 cm) gap
between
the door panel and the adjacent
cabinet
increases
the risk of potential
pinching.
Remove
the
Packaging
Remove
tape and glue residue from surfaces
before turning
on the refrigerator.
Rub a small amount
of liquid dish soap
over the adhesive
with your fingers.
Wipe with warm water
and dry.
Do not use sharp
instruments,
rubbing
alcohol,
flammable
fluids,
or abrasive
cleaners to remove tape or glue. These
products
can damage
the surface of your refrigerator.
For
more information,
see "Refrigerator
Safety."
Clean
Before
Using
After you remove all of the packaging
materials,
clean the inside
of your refrigerator
before using
it. See the cleaning
instructions
in "Refrigerator
Care."
important
information
to know
about
glass
shelves
and covers:
Do not clean glass shelves
or covers
with warm water when
they are cold. Shelves and covers may break if exposed
to
sudden temperature
changes
or impact,
such as bumping.
Tempered
glass is designed
to shatter
into many small,
pebble-size
pieces. This is normal.
Glass shelves and covers
are heavy. Use both hands when removing
them to avoid
dropping.
Dispose
of/recycle
all packaging
materials.
REFRIGERATORUSE
Electrical
Shock
Hazard
Plug into
a
grounded
3 prong
outlet.
Do
not
remove
ground prong.
Do
not
use an adapter.
Do
not
use an extension
cord.
Failure
to follow
these
instructions
can result
in
death,
fire, or electrical
shock.
Explosion
Hazard
Keep
flammable
materials
and
vapors,
such
as
gasoline,
away from
refrigerator.
Failure
to do so can
result
in
death,
explosion,
or fire.
If you need to turn the power to your refrigerator
On or Off, you
must remove the top grille panel to access
the power switch.
Turn the power
to the refrigerator
Off when
cleaning your
refrigerator
or changing
light bulbs.
B
A
B
A. Top grille
B. Cabinet sides
Standard
Installation
-
Flush Grille
To remove
the top grille panel:
1.
Open the door(s).
2.
Lift the top grille panel straight
up, then pull straight
out.
Place the panel on a soft surface.
To replace
the
top
grille
panel:
1.
Hook the panel brackets
onto the mounting
bolts extending
from the top of the refrigerator.
2.
Pull the grille panel down
slightly to lock
into place.
Sample