Jenn-Air JB36NXFXLW00 user manual download (Page 11 of 52)

Languages: English
Pages:52
You can view the full version and download it in PDF format.
Page 11 of 52
4=
Turn the cap counterclockwise
until the cap slips into the
attachment
slot. Then, turn the cap clockwise
until it is in a
horizontal
position.
NOTE: The cap will not be even with the base grille.
Turn
the
Ice Maker
On/Off
The ice maker
On/Off control
is located
on the left-hand
side of
the ice bin.
1.
2=
To turn on the ice maker, slide the ice maker On/Off control
to
the ON (up) position.
NOTE: Your ice maker has an automatic
shutoff. As ice is
made, the ice cubes will fill the ice storage
bin. The ice maker
sensors
will automatically
stop
ice production,
but the ice
maker control
will remain in the ON (up) position.
To manually
turn off the ice maker, slide the ice maker
On/Off
control
to the OFF (down) position
as shown.
A
A.
On/Off
control
Ice Storage Bin Care
1.
Slide the ice bin out of the freezer and lift up and out.
2.
Empty the ice bin. Use warm water to melt the ice if
necessary.
NOTE: Do not use anything
sharp to break up the ice in the
bin. This can cause damage
to the ice container
and the
dispenser
mechanism.
3.
Wash ice bin with warm water and a mild detergent,
rinse well
and dry thoroughly.
Do not use harsh or abrasive cleaners or
solvents.
REMEMBER:
Allow 24 hours to produce
the first batch of ice.
Discard
the first three batches
of ice produced
to avoid
impurities
that may be flushed
out of the system.
It may take 3 to 4 days for the ice bin to completely
fill, if no
ice is used.
The quality
of your ice will be only as good as the quality
of
the water supplied
to your ice maker.
Avoid connecting
the ice maker to a softened
water supply.
Water softener
chemicals
(such as salt) can damage
parts of
the ice maker and lead to poor quality
ice. If a softened
water
supply
cannot
be avoided,
make sure the water softener
is
operating
properly
and is well maintained.
It is normal for the ice cubes to be attached
at the corners.
They will break apart easily.
Do not store anything
inside the ice bin.
REFRIGERATORCARE
Explosion
Hazard
Use
nonflammable
cleaner.
Failure
to do
so can
result
in
death,
explosion,
or fire.
Both the refrigerator
and freezer sections
defrost
automatically.
However,
clean both sections
about once a month to avoid
buildup
of odors. Wipe up spills
immediately.
To Clean
Your
Refrigerator:
1.
Remove
the top grille. See "Power
On/Off Switch."
2.
Press power
switch
to OFE
3.
Remove
all removable
parts from inside,
such as shelves,
crispers,
etc.
4.
Hand wash, rinse, and dry removable
parts and interior
surfaces thoroughly.
Use a clean sponge
or soft cloth and a
mild detergent
in warm water.
Do not use abrasive or harsh cleaners such as window
sprays,
scouring
cleansers,
flammable
fluids,
cleaning
waxes,
concentrated
detergents,
bleaches
or cleansers
containing
petroleum
products
on plastic parts,
interior
and door liners or gaskets.
Do not use paper towels,
scouring
pads, or other harsh cleaning
tools. These can
scratch
or damage
materials.
To help remove odors, you can wash interior walls with a
mixture
of warm water and baking soda (2 tbs to 1 qt
[26 g to 0.95 L] of water).
5.
Wash stainless
steel and painted metal exteriors with
a clean
sponge
or soft cloth and a mild detergent
in warm water. Do
not use abrasive
or harsh cleaners,
or cleaners
containing
chlorine.
Dry thoroughly
with a soft cloth.
NOTE: To keep your Stainless
Steel refrigerator
looking like
new and to remove minor scuffs or marks,
it is suggested
that
you use the manufacturer's
approved
Stainless
Steel Cleaner
and Polish.
6=
7.
IMPORTANT:
This cleaner is for Stainless Steel parts
only!
Do not allow the Stainless
Steel Cleaner and Polish to come
into contact
with any plastic
parts such as the trim pieces,
dispenser
covers or door gaskets.
If unintentional
contact
does occur, clean plastic
part with
a sponge
and mild
detergent
in warm water. Dry thoroughly
with a soft cloth.
To
order the cleaner, see "Accessories."
Press the power switch
to ON.
Replace the top grille. See "Power
On/Off Switch."
11
Sample