Jenn-Air JB36CXFXLB00 user manual download (Page 6 of 44)

Languages: English
Pages:44
You can view the full version and download it in PDF format.
Page 6 of 44
IM PORTANT:
The refrigerator
control
adjusts the refrigerator
compartment
temperature.
The freezer control
adjusts the freezer
compartment
temperature.
Wait 24 hours after you turn on the refrigerator
before you put
food into it. If you add food before the refrigerator
has cooled
completely,
your food may spoil.
NOTE: Adjusting
the refrigerator
and freezer controls
to a
lower (colder) setting will not cool the compartments
any
faster.
If the temperature
is too warm or too cold in the refrigerator
or
freezer, first check
the air vents to be sure they are not
blocked
before adjusting
the controls.
The preset settings should
be correct
for normal household
usage. The controls
are set correctly
when milk or juice is as
cold as you like and when
ice cream
is firm.
The actual temperature
may differ from the display when a
door is open for an extended
period of time.
NOTE:
The factory
recommended
set points are 0°F (-18°C) for
the freezer and 37°F (3°C) for the refrigerator.
Turning Refrigerator On and Viewing Set Points
Press the Cooling (ON/OFF)touch pad.
NOTES:
After the refrigerator
is turned
on, the Over Temperature
audio
alarm and indicator
light may activate
every 11/2hours until the
refrigerator
and freezer temperatures
are below 48°F (9°C) and
15°F (-9°C), respectively,
or until the alarm is turned
off. To
turn off the audio alarm and indicator
light, see "Master Alarm
Reset."
The ON/OFF
touch pad on the control
panel shuts down
refrigerator
functions
such as cooling,
lighting, fans and
compressors.
To turn the power off completely,
use the power
ON/OFF switch
located
behind the top grille. See "Power On/
Off Switch."
Press the "Set to Recommended"
touch pad to reset the set
points to the factory
recommended
temperatures.
NOTE: The set point range for the freezer is -5°F to 5°F
(-21 °C to -15°C). The set point range for the refrigerator
is
33°F to 45°F (0°C to 7°C).
CONDITION/REASON:
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold
REFRIGERATOR Control
Not set correctly
for conditions
1° higher
REFRIGERATOR too warm
REFRIGERATOR Control
High use or room very warm
1° lower
FREEZER too cold
FREEZER Control
Not set correctly
for conditions
1° higher
FREEZER too warm/too
little ice
FREEZER Control
High use or heavy ice use
1° lower
Water
Filter
Indicator
& Reset
See "Water Filter Indicator."
Max
Cold
The Max Cold feature assists with
periods of heavy ice usage, full
grocery
loads, or temporarily
warm room temperatures.
Press MAX COLD to turn on the Max Cold feature. The Max
Cold indicator
light will remain on for 24 hours unless manually
turned
off.
NOTE: The temperature
display will remain at 34°F (1°C) and -5°F
(-21 °C) for the refrigerator
and freezer compartments,
respectively,
while the Max Cold feature is enabled. After
24 hours, the refrigerator
returns to the previous temperature
set
points.
Rest Mode
Viewing
the Celsius Temperatures
Press F/C touch
pad. To redisplay
degrees Fahrenheit,
press
F/C again.
NOTE: If the freezer temperature
is below zero, the negative sign
next to the freezer display will light up. This is normal.
Adjusting Controls
The Rest Mode feature is designed
for the traveler or for those
whose religious
observances
require turning off the lights and ice
maker. By selecting
this feature,
the temperature
set points and
Deli Pan settings
remain unchanged,
the ice maker will be
disabled
and the interior lights will turn off. For most efficient
refrigerator
operation,
it is recommended
to exit the Rest Mode
when it is no longer required.
Press REST MODE to turn on the Rest Mode feature. This
feature will remain on until Rest Mode is pressed again.
NOTE:
Wait at least 24 hours between
adjustments.
Recheck the
temperatures
before other adjustments
are made.
To Adjust
Set Point Temperatures:
Press the refrigerator
or freezer PLUS (+) or MINUS (-) touch
pad until the desired temperature
is reached.
FROZEN FOOD
Set
to
Recommended
37_F ]_C
FRESH
FOOD
@
NOTE: If the Max Cold feature has been selected
prior to turning
on the Rest Mode feature, then the set points will remain at 34°F
(1°C) and -5°F (-21 °C) for the refrigerator
and freezer
compartments,
respectively,
until the Max Cold feature times out.
The refrigerator
will then return to the previous temperature
set
points chosen
prior to the selection
of the Max Cold feature,
but
the lights and ice maker will remain off until the Rest Mode
is
pressed again.
6
Sample