Inglis I4TXCGFXQ00 user manual download (Page 9 of 28)

Languages: English
Pages:28
You can view the full version and download it in PDF format.
Page 9 of 28
Your refrigerator
has two front adjustable
rollers - one on the right
and one on the left. If your refrigerator
seems unsteady
or you
want the doors to close easier, adjust the refrigerator's
tilt using
the instructions
below.
Depending
on your model,
your refrigerator
may have leveling
legs (Style 1) or leveling screws (Style 2). They are part of the front
roller assemblies
which are found at the base of the refrigerator
on
either side.
1.
Turn the leveling legs or leveling
screws to the right to raise
that side of the refrigerator
or to the left to lower that side. It
may take several turns to adjust the tilt of the refrigerator.
NOTE: Having someone
push against the top of the
refrigerator
takes some weight
off the leveling screws and
rollers. This makes it easier to adjust the screws.
2.
Open both doors again and be sure that they close as easily
as you like. If not, tilt the refrigerator
slightly more to the rear
by turning
both leveling screws to the right. It may take several
more turns, and you should turn both leveling
screws the
same amount.
Style
I
Style
2
3.
Using a level, be sure that the refrigerator
is still level side to
side, Readjust if necessary.
REFRIGERATOR
USE
For your convenience,
your refrigerator
controls
are preset at the
factory. When you first install your refrigerator,
make sure that the
controls
are still preset to the mid-settings
as shown.
NOTE: To turn your refrigerator
off, turn the refrigerator
control to
the word OFF or until the word OFF appears.
Your product
will not
cool when the refrigerator
control
is set to OFR
Mid-setting
"3"
OFF
COLI£S
@
£
I
3
IMPORTANT:
Give your refrigerator
time to cool down completely
before
adding
food, It is best to wait 24 hours before you put food
into the refrigerator.
If you add food before the refrigerator
has cooled completely,
your food may spoil. Adjusting
the Refrigerator
and Freezer
Controls
to a higher (colder) than recommended
setting will
not cool the compartments
any faster.
Sample