Inglis I4TXCGFXQ00 user manual download (Page 5 of 28)

Languages: English
Pages:28
You can view the full version and download it in PDF format.
Page 5 of 28
Complete
the Installation
Electrical
Shock
Hazard
Plug into
a
grounded
3 prong outlet.
Do not
remove
ground
prong.
Do not
use an adapter.
Do not
use an
extension
cord,
Failure to
follow
these
instructions
can result in death,
fire,
or
electrical
shock.
Plug into a grounded
3 prong outlet.
NOTE: Allow
24 hours to produce
the first batch of ice. Discard
the first three batches of ice produced.
Allow 3 days to completely
fill ice container.
TOOLS NEEDED:
%6" hex-head
socket
wrench,
#2 Phillips
screwdriver,
flat-blade
screwdriver,
%6" open-end
wrench, flat
2" putty knife.
IMPORTANT:
Before you begin, turn the refrigerator
control
OFE Unplug
refrigerator
or disconnect
power.
Remove food and adjustable
door or utility bins from doors.
If you are only removing
and replacing the doors, see the
"Remove
Doors and Hinges"
and "Replace
Doors and
Hinges"
sections.
Depending
on your model, you may have standard
(Style
1)
or
contoured
(Style 2) doors.
If you are also going to reverse the
door swing, follow the instructions
for the appropriate
door
style.
Remove Doors and Hinges
"5/16"
Hex-Head
Hinge Screw
1.
Unplug refrigerator
or disconnect
power.
2.
Close the refrigerator
door and keep both doors closed
until
you are ready to lift them free from the cabinet.
NOTE: Provide additional
support
for the doors while the
hinges are being moved. Do not depend on the door magnets
to hold the doors
in place while you are working.
3.
Remove the parts for the top hinge as shown in Top Hinge
graphic.
Lift the freezer door free from the cabinet.
4.
Remove the parts for the center hinge as shown
in the Center
Hinge graphic.
Lift the refrigerator
door free from the cabinet.
5.
Remove the parts for the bottom
hinge as shown
in the
Bottom
Hinge graphic.
Reverse Doors (optional)
IMPORTANT:
If you want to reverse your doors so that they open
in the opposite
direction,
follow these steps. If you are not
reversing the doors, see "Replace
Doors and Hinges."
Style
I - Standard
Graphics follow these instructions.
Door Stop Screw
Door Handle Sealing Screw
Flat-Head Handle Screw
Door Hinge Hole Plug
Cabinet Hinge Hole Plug
Door Handle
Screw
Cover
Door Handle Seal Screw Front
Round-Head
Handle
Screw
Cabinet
1.
Remove %6" hex-head
hinge screws from handle side and
move them to opposite
side. See Graphic
1-1.
2.
Remove cabinet
hinge hole plugs from cabinet
top and
move them to opposite
side hinge holes as shown.
See Graphic
1-2.
Freezer
door
f.
Remove freezer handle assembly
as shown. Keep all parts
together. See Graphic
2.
2.
Remove door hinge hole plug. Move to opposite
side as
shown. See Graphic
3.
3.
Remove door handle sealing screws.
Move to opposite
side of
freezer door as shown. See Graphic
4.
4.
Remove door stop. Move to opposite
side of freezer door as
shown. See Graphic
5.
5.
Position freezer handle on opposite
side of freezer door.
Assemble
handle on door as shown. See Graphic
2.
6.
Tighten all screws.
Set aside door until hinges and refrigerator
compartment
door are in place.
Refrigerator
door
f.
Remove the screw cover. See Graphic
6.
2.
Remove
refrigerator
handle assembly
as shown.
Keep all
parts together.
See Graphic
6.
3.
Remove door hinge hole plug from refrigerator
door. Move to
opposite
side hinge hole as shown. See Graphic
3.
4.
Remove door handle sealing screws.
Move to opposite
side of
refrigerator
door as shown.
See Graphic
4.
5.
Remove door handle seal screw front. Move to opposite
side
of refrigerator
door as shown. See Graphic 7.
6.
Remove door stop. Move to opposite
side of refrigerator
door
as shown. See Graphic
5.
7.
Position refrigerator
handle on opposite side of the refrigerator
door as shown. See Graphic
6. Drive top two screws in handle
first. Align lower portion
of handle and drive bottom
screw.
8.
Replace screw cover. See Graphic
6.
9.
Tighten all screws.
Set aside refrigerator
door until bottom
hinge is installed on refrigerator.
Sample