Inglis I4TXCGFXQ00 user manual download (Page 3 of 28)

Languages: English
Pages:28
You can view the full version and download it in PDF format.
Page 3 of 28
Explosion
Hazard
Keep
flammable
materials
and
vapors, such
as
gasoline,
away from refrigerator.
Failure
to do so can
result
in
death,
explosion,
or fire.
To ensure proper ventilation
for your refrigerator, allow for a 1/211
(12.70 mm) space on each side. Allow 3" (7.5 cm) of space
between overhead
cabinets
and refrigerator
top. Allow
at least 1"
(25.40 mm) between
back of cabinet and the wall.
If your
refrigerator
has an ice maker, make sure you leave some extra
space at the back for the water line connections.
If you are installing
your refrigerator
next to a fixed wall, leave
2" (5.08 cm) minimum
on the hinge side (depending
on your
model) to allow for the door to swing open.
Level the refrigerator.
See "Adjust
the Doors."
NOTE: It is recommended
that you do not install the refrigerator
near an oven, radiator, or other heat source. Do not install in a
location where the temperature
will fall below 55°F (13°C).
3" (7.5crn)
/
°_
U
II
I
_11
I
/
/
2"
(5.08cm)
Electrical
Shock
Hazard
Plug into
a grounded
3 prong outlet.
Do not
remove
ground
prong.
Do not
use an adapter.
Do not
use an extension
cord.
Failure
to follow
these
instructions
can result
in
death,
fire, or electrical
shock.
Before you move your refrigerator
into its final location,
it is
important
to make sure you have the proper electrical
connection.
Recommended
Grounding
Method
A 115 Volt, 60 Hz., AC only 15- or 20-amp
fused, grounded
electrical
supply
is required.
It is recommended
that a separate
circuit serving only your refrigerator
be provided.
Use an outlet
that cannot
be turned off by a switch.
Do not use an
extension
cord.
NOTE:
Before performing
any type of installation,
cleaning,
or
removing
a light bulb, turn the control (Thermostat,
Refrigerator or
Freezer Control depending
on the model) to OFF and then
disconnect
the refrigerator
from the electrical
source. When you
are finished,
reconnect
the refrigerator
to the electrical
source and
reset the control
(Thermostat,
Refrigerator
or Freezer Control
depending
on the model) to the desired setting.
Read all directions
before you begin.
IMPORTANT:
If you turn the refrigerator
on before the water line is
connected,
turn the ice maker OFR
All installations
must meet local plumbing
code requirements.
Use copper
tubing and check for leaks. Install copper
tubing
only in areas where the household
temperatures
will remain
above freezing.
TOOLS NEEDED:
Flat-blade
screwdriver,
7/1611
and 1/211
open-end
wrenches or 2 adjustable
wrenches,
1/4"nut driver and drill bit,
hand drill or electric drill (properly grounded).
Gather the required
tools and parts before starting installation.
Read and follow the
instructions
provided
with any tools listed.
NOTE: Your refrigerator
dealer has a kit available with a 1/4"
(6.35 mm) saddle-type
shutoff valve, a union, and copper
tubing.
Before purchasing,
make sure a saddle-type
valve complies
with
your local plumbing
codes.
Do not use a piercing-type
or 3/_6"
(4.76 mm) saddle valve which
reduces water flow and clogs more
easily.
Sample