Inglis I4TXCGFXQ00 user manual download (Page 12 of 28)

Languages: English
Pages:28
You can view the full version and download it in PDF format.
Page 12 of 28
The
doors will not close completely
Door blocked
open?
Move food packages
away from door.
Bin or shelf
in the way?
Push bin
or
shelf back in the correct
position.
Crisper
cover
in the way?
Make sure the crisper cover is
pushed in fully, so that the back rests on the supports.
The
doors are difficult to open
Explosion
Hazard
Use nonflammable
cleaner.
Failure
to do so can
result
in
death,
explosion,
or fire.
Gaskets
dirty
or
sticky?
Clean gaskets and contact
surfaces
with mild soap and warm water. Rinse and dry with soft cloth,
The lights do not work
Is a light bulb
loose
in the socket
or burned
out? See
"Changing
the Light Bulbs."
Temperature is too warm
New
installation?
Allow
24 hours following
installation
for the
refrigerator
to cool completely.
Door(s}
opened
often
or left open?
Allows warm air to enter
refrigerator.
Minimize door openings
and keep doors fully
closed.
Large
load of food
added?
Allow several hours for
refrigerator
to return to normal temperature.
Controls
set correctly
for the surrounding
conditions?
Adjust the controls
a setting
colder. Check temperature
in
24 hours. See "Using the Controls."
There is interior
moisture
buildup
NOTE: Some moisture
buildup
is normal.
Humid
room?
Contributes
to moisture
buildup.
Door(s}
opened
often
or left open? Allows
humid air to enter
refrigerator.
Minimize door openings
and keep doors fully
closed.
The ice maker is not producing ice or not
enough
ice
Refrigerator
connected
to a water
supply and the supply
shutoff valve turned
on?
Connect
refrigerator
to
water
supply
and turn water shutoff
valve fully open.
Kink
in the water
source
line? A kink in the line can reduce
water flow. Straighten
the water source
line.
Ice maker
turned
on? Make sure wire shutoff arm or switch
(depending
on model) is in the ON position.
New
installation?
Wait 24 hours after ice maker installation
for ice production
to begin. Wait 72 hours for full ice
production.
Large amount
of
ice
recently
removed?
Allow 24 hours for
ice maker to produce
more ice.
Ice
cube jammed
in the ice maker
ejector
arm?
Remove ice from the ejector arm with a plastic utensil.
Reverse
osmosis
water
filtration
system
connected
to
your cold
water
supply?
This can decrease water pressure.
See "Water Supply
Requirements."
The ice cubes are hollow
or small
NOTE: This is an indication
of low water pressure,
Water shutoff
valve
not fully
open? Turn the water shutoff
valve fully open.
Kink
in the water
source
line? A kink in the line can reduce
water flow, Straighten
the water source
line,
Reverse
osmosis
water
filtration
system
connected
to
your cold
water
supply?
This can decrease water pressure,
See "Water Supply
Requirements."
Questions
remain
regarding
water
pressure?
Call a
licensed,
qualified
plumber.
Off-taste,
odor or gray color in the ice
New plumbing
connections?
New plumbing
connections
can cause discolored
or off-flavored
ice.
Ice stored
too
long?
Discard
ice. Wash ice bin. Allow
24 hours for ice maker to make new ice.
Odor transfer
from
food?
Use airtight, moisture
proof
packaging
to store food.
Are there minerals
(such
as sulfur)
in the wate_
A water
filter may need to be installed to remove the minerals.
12
Sample