Ikea ID5HHEXVQ01 user manual download

You can view the full version and download it in PDF format.
Page 8 of 40
3_
y
......
Do not use with water that is microbiologically
unsafe or of
unknown
quality
without adequate
disinfection
before or
after the system.
Water
Filter Status Light (on some models)
The water filter status light will help you know when to change
your water filter. The light will change from green to yellow. This
tells you that it is almost time to change the filter. It is
recommended
that you replace the water filter when the status
light changes to red OR water flow to your water dispenser
or ice
maker decreases
noticeably.
After changing
the water filter, reset the water filter status light.
The status light will change from red to green when the system is
reset.
Non-indicator Water Filter (on some models)
If your refrigerator
does not have the status light, you should
change the water filter every 6 months depending
upon your
usage. If the water flow to the water dispenser
or ice maker
decreases
noticeably
before 6 months have passed,
replace the
water filter more often.
Using the Dispenser Without the Water Filter
You can run the dispenser
without a water filter. Your water will not
be filtered.
1.
Remove the water filter.
2.
Slide the cap off the end of the filter and replace the cap in the
base grille.
IMPORTANT:
Do not discard
the cap. It is part of your
refrigerator.
Keep the cap to use with the replacement
filter.
REFRIGERATORCARE
Explosion
Hazard
Use
nonflammable
cleaner.
Failure
to
do so can
result
in
death,
explosion,
or fire.
Both the refrigerator
and freezer sections
defrost automatically.
However, clean both sections
about once a month to prevent
odors from building
up. Wipe up spills immediately.
IMPORTANT:
Because
air circulates
between both sections,
any
odors formed
in one section will transfer
to the other. You must
thoroughly
clean both sections to eliminate
odors. To prevent
odor transfer
and drying out of food, wrap or cover foods tightly.
To Clean
Your
Refrigerator:
NOTE:
Do not use abrasive or harsh cleaners such as window
sprays, scouring
cleansers, flammable
fluids,
cleaning waxes,
concentrated
detergents,
bleaches
or cleansers
containing
petroleum
products
on plastic parts,
interior and door liners or
gaskets.
Do not use paper towels,
scouring
pads, or other harsh
cleaning tools.
1.
Unplug refrigerator
or disconnect
power.
2.
Hand wash, rinse, and dry removable
parts and interior
surfaces thoroughly.
Use a clean sponge or soft cloth and a
mild detergent
in warm water.
3.
Wash stainless
steel and painted metal exteriors
with a clean
sponge or soft cloth and a mild detergent
in warm water.
4.
There is no need for routine condenser
cleaning
in normal
home operating
environments.
If the environment
is
particularly
greasy or dusty, or there is significant
pet traffic
in
the home, the condenser
should be cleaned every 2 to
3 months to ensure maximum
efficiency.
If you need to clean the condenser:
5.
Remove the base grille.
Use a vacuum
cleaner with
a soft brush to clean the grille,
the open areas behind the grille and the front surface area
of the condenser.
Replace the base grille when finished.
Plug in refrigerator
or reconnect
power.
.....
_;_
_;_;f__;;; _ _;;#_. _,;;;__,,_>_
NOTE:
Not all bulbs will fit your refrigerator.
Be sure to replace the
bulb with one of the same size, shape and wattage.
On some
models,
the dispenser
light requires a heavy duty 1O-watt bulb. All
other lights require a 40-watt
bulb. Replacement
bulbs
are
available from your dealer.
1.
Unplug refrigerator
or disconnect
power.
2.
Remove
light shield when applicable.
NOTE: To clean the light shield, wash it with warm water and
liquid detergent.
Rinse and dry the shield well.
3.
Remove
light bulb and replace with
one of the same size,
shape and wattage.
4.
Replace light shield when applicable.
5.
Plug in refrigerator
or reconnect
power.
8
Sample