Ikea ID5HHEXVQ01 user manual download

You can view the full version and download it in PDF format.
Page 7 of 40
The Ice Dispenser
The dispensing
system will not operate
when the freezer door is
open. Ice dispenses
from the ice maker storage
bin in the freezer
when the dispenser
lever is pressed.
NOTE: Some models
dispense
both cubed
and crushed
ice.
Before dispensing
ice, select which type of ice you prefer.
For crushed ice, cubes are crushed
before being dispensed.
This
may cause a slight delay when dispensing
crushed ice. Noise
from the ice crusher
is normal,
and pieces
of ice may vary in size.
When changing
from crushed to cubed,
a few ounces of crushed
ice will be dispensed
along with the first cubes.
To Dispense
Ice:
1.
If the ice storage
bin is located on the door, remove the
temporary
shield from underneath
the ice storage
bin. See
"Ice Maker and Storage
Bin."
2.
Press the button to select the desired type of ice.
Cut Hazard
Use
a
sturdy
glass
when
dispensing
ice.
Failure
to do so
can
result
in cuts.
3.
Press a sturdy glass against the ice dispenser
lever. Hold the
glass close to the dispenser
opening so ice does not fall
outside
of the glass.
IMPORTANT:
You do not need to apply a lot of pressure to the
lever in order to activate the ice dispenser.
Pressing
hard will
not make the ice dispense
faster or in greater quantities.
4.
Remove the glass to stop dispensing.
The Dispenser Light
Style
1: The dispenser
light can be turned
on by pressing the ON
button.
Style 2:
When you use the dispenser,
the lever will automatically
turn the light on. If you want the light to be on continuously,
you
may choose
either ON or NIGHT LIGHT.
ON: Press the LIGHT button to turn on the dispenser
light.
NIGHT
LIGHT:
Press the LIGHT button a second
time to select
the Night Light. The dispenser
light will automatically
adjust to
become
brighter
as the room brightens,
dimmer as the room
darkens.
OFF:
Press the LIGHT button a third time to turn off the dispenser
light.
The dispenser
lights are LEDs which should
not need to be
changed.
If it appears
that your dispenser
lights are not working,
be sure that the light sensor is not blocked
(in Night Light mode).
See "Troubleshooting"
for more information.
The Dispenser Lock (on some models)
Your dispenser
can be turned off for easy cleaning
or to prevent
unintentional
dispensing
by small children
and pets.
NOTE:
The lock feature does not shut off power to the product,
to
the ice maker, or to the dispenser
light. It simply deactivates
the
dispenser
levers. The ice and water dispensers
will not work.
Style
1: Press the LOCK button to lock the dispenser.
Press the
UNLOCK
button to unlock
the dispenser.
Style 2:
Press and hold the LOCK OUT button to lock the
dispenser.
Press and hold the LOCK OUT button a second time to
unlock
the dispenser.
Turning
the
Ice
Maker
On/Off
To turn ON the ice maker, simply
lower the wire shutoff
arm.
To manually turn off the ice maker, lift the wire shutoff
arm to the
OFF (arm up) position
and listen for the click.
NOTE:
Your ice maker has an automatic
shutoff. As ice is made,
the ice cubes will fill the ice storage
bin, and the ice cubes will
raise the wire shutoff
arm to the OFF (arm up) position.
Do not
force the wire shutoff
arm up or down.
REMEMBER:
Allow 24 hours to produce
the first batch of ice. Discard the
first three batches
of ice produced.
The quality of your ice will be only as good as the quality
of the
water supplied
to your ice maker. Avoid
connecting
the ice
maker to a softened
water supply. Water softener
chemicals
(such as salt) can damage
parts of the ice maker and lead to
poor quality ice. If a softened
water supply
cannot
be avoided,
make sure the water softener
is operating
properly
and is well
maintained.
Do not use anything sharp to break up the ice in the storage
bin. This can cause damage
to the ice container
and the
dispenser
mechanism.
Do not store anything on top of or in the ice maker
or storage
bin.
Removing
and
Replacing
Ice Storage
Bin
1.
Pull the covering
panel up from the bottom
and then slide it
back toward
the rear.
2.
Lift the wire shutoff
arm so it clicks
into the OFF (up) position.
Ice can still be dispensed,
but no more can be made.
3.
Lift up the front of the storage
bin and pull it out.
4=
Replace the bin by pushing
it in all the way or the dispenser
will not work.
Push the wire shutoff
arm down to the ON
position
to restart ice production.
Make sure the door is
closed
tightly.
Sample