Ge CFCP1NIYASS user manual download (Page 4 of 136)

Languages: English
Pages:136
You can view the full version and download it in PDF format.
Page 4 of 136
About the
controls
with temperature
settings.
(on somemodels)
[]
[]
TEMPERATURE
SET
WARMER
_WARMER
COLDER
COLDER
0 o FRecommended
37° F Recommended
[]
[]
[]
Hold
3 seconds
to
reset
Hold
3 seconds
(on somemodels)
NOTE: The refrigerator
is
shipped
with protective film covering the temperature
controls.
If this film was not removed during installation,
remove it now.
The temperature
controls
are preset in the
factory
at
37°F for
the refrigerator
compartment
and O°F
for
the freezer
compartment.
Allow
24
hours
for
the temperature
to
stabilize
to the preset recommended
settings.
The temperature
controls
can display
both the SET temperature
as
well as the actual
temperature
in the refrigerator
and freezer. The actual
temperature
ma_t var_t
slightl_t
from the SET temperature
based
on usage and operating
environment.
Setting
either
or both controls
to OFF
stops
cooling
in both the freezer and refrigerator
compartments,
but
does not
shut
off electrical
power
to the refrigerator.
4
Changing
the
Temperature
For
Controls-on-the-Door
Models:
To change
the
temperature,
pressand release the
WARMER
or
COLDER
pad.The
ACTUALTEMP
light
will come on and the display will show the actual
temperature. To change the temperature, tap either
the
WARMER
or COLDERpad until the desired
temperature is displayed.
For
Controls
Inside the Refrigerator:
Opening the door displays the actual temperature. To
change the temperature, presseither the
WARMER
or
COLDER
touch pads until the desired temperature is
displayed.
Once the desired temperature has been set,
the temperature display will return to the actual
refrigerator and freezertemperatures after 5 seconds.
Severaladjustments may be required.
Eachtime you adjust controls,allow 2/4hours for the
refrigerator to reach the temperature you have set.
To turn
the
cooling
system off, tap the
WARMER
pad
for either the refrigerator or the freezer until the
display shows
OFF.To turn the unit back on,
press
the COLDERpad for either the refrigerator or freezer.
Then pressthe
COLDER
pad again and it will go to
the preset points of
O°F
for the freezer and 37°Ffor
the refrigerator.Setting either or both controls
to
OFF
stops cooling in both the freezer and
refrigerator compartments, but does not shut
off electrical power to the refrigerator.
Sample