Ge CFCP1NIYASS user manual download (Page 27 of 136)

Languages: English
Pages:136
You can view the full version and download it in PDF format.
Page 27 of 136
Installation
Instructions
REVERSING THE DOOR SWING
{Single Door
Refrigerator
Models
onlg}
IMPORTANT
NOTES
When reversing the door swing:
NOTE: Door swing is not reversible on stainless steel
models.
Read the instructions
all the wag through
before
starting.
Parts are included in the door hinge kit.
Handle parts carefullg to avoid scratching
paint.
Set screws down bg their related parts to avoid
using them in the wrong places.
Provide a non-scratching
work surface for the doors.
IMPORTANT: Once gou begin, do not move the cabinet
until door-swing
reversal is completed.
These instructions
are for changing the hinges from
the right side to the left side-if
gou ever want to
change the hinges back to the right side, follow these
same instructions
and reverse all references to left and
right.
Once door swing is finalized, ensure the logo badge
is properlg aligned and permanentl U secured to
the door bg removing the adhesive cover on the
back side.
NOTE: A replacement
logo badge is included in the
hinge kit.
Unplug the
refrigerator
from
its electrical
outlet.
Empty
all door shelves, including
the dairy
compartment.
TOOLS YOU WILL
NEED
AdjustableWrench
5/16" SocketRatchet/Driver
MaskingTape
Thin-bladeScrewdriver
PhillipsScrewdriver
TerxT-20Driver
[]
REMOVE THE REFRIGERATOR DOOR
r_
Tape the door
shut with
masking
tape.
r_
Remove the hinge
cover on top of the
refrigerator
door bg removing
the Phillips-head
screws
and pulling
it up.
rc]
using a 5/16"
socket ratchet/driver,
remove
the
bolts securing
the top hinge to the cabinet.
Then
lift the hinge straight
up to free the hinge pin
from the socket in the top of the door.
Hinge_Cover
@
Hinge
G
Remove the tape and tilt the door awag from
the cabinet.
Lift the door off the center
hinge
pin. Ensure that the plastic
hinge pin thimble
remains
on the hinge pin or inside door hinge
pin hole located
in the bottom
of the door.
[]
Set the door on a non-scratching
surface with
the inside up.
27
Sample