Estate TS22AFXKQ06 user manual download (Page 7 of 40)

Languages: English
Pages:40
You can view the full version and download it in PDF format.
Page 7 of 40
To Dispense
Ice:
1.
Press the button to select the desired type of ice.
2.
Press a sturdy glass against the ice dispenser
lever. Hold the
glass close to the dispenser
opening so ice does not fall
outside
of the glass.
IMPORTANT:
You do not need to apply a lot of pressure to the
lever in order to activate the ice dispenser.
Pressing
hard will
not make the ice dispense
faster or in greater quantities.
3.
Remove the glass to stop dispensing.
The Dispenser
Light
The dispenser
area has a light. It can be turned
on manually
by
pressing the ON button (touchpad
or rocker
switch).
On some models: Whenever
you use the dispenser,
the lever will
automatically
turn the light on.
LIGHT
OFF
ON
NOTE:
See the "Changing
the Light Bulbs" section for information
on changing
the dispenser
light bulb.
The Dispenser
Lock
(on some
models)
Your dispenser
can be turned off for easy cleaning
or to prevent
unintentional
dispensing
by small children
and pets.
NOTE: The lock feature does not shut off power to the product,
to
the ice maker, or to the dispenser
light. It simply deactivates
the
dispenser
levers. The ice and water dispensers
will not work.
Press the LOCK button to lock the dispenser.
Press and hold the LOCK OUT button a second time to unlock
the dispenser.
Turning
the Ice Maker
On/Off
To turn ON the ice maker, simply lower the wire shutoff
arm.
To manually turn off the ice maker, lift the wire shutoff arm to the
OFF (arm up) position
and listen for the click.
NOTE: Your ice maker has an automatic
shutoff. As ice is made,
the ice cubes will fill the ice storage
bin, and the ice cubes will
raise the wire shutoff
arm to the OFF (arm up) position.
Do not
force the wire shutoff
arm up or down.
REMEMBER:
Allow 24 hours to produce
the first batch of ice. Discard the
first three batches
of ice produced.
The quality of your ice will be only as good as the quality
of the
water supplied
to your ice maker. Avoid connecting
the ice
maker to a softened
water supply. Water softener
chemicals
(such as salt) can damage
parts of the ice maker and lead to
poor quality
ice. If a softened
water supply
cannot
be avoided,
make sure the water softener
is operating
properly
and is well
maintained.
Do not use anything sharp to break up the ice in the storage
bin. This can cause damage
to the ice container
and the
dispenser
mechanism.
Do not store anything on top of or in the ice maker or storage
bin.
Removing
and Replacing
Ice Storage
Bin
1.
Pull the covering
panel up from the bottom
and then slide it
back toward
the rear.
2.
Lift the wire shutoff
arm so it clicks into the OFF (up) position.
Ice can still be dispensed,
but no more can be made.
3.
Lift up the front of the storage
bin and pull it out.
Replace the bin by pushing
it in all the way or the dispenser
will not work.
Push the wire shutoff
arm down to the ON
position
to restart ice production.
Make sure the door is
closed
tightly.
NOTE: Do not use with water
that is microbiologically
unsafe
or of unknown
quality without
adequate
disinfection
before or
after the system.
Water
Filter Status
Light (on some
models)
The water filter status light will help you know when to change
your water filter. The light will change from green to yellow. This
tells you that it is almost time to change the filter. It is
recommended
that you replace the water filter when the status
light changes to red OR water flow to your water dispenser
or ice
maker decreases
noticeably.
After changing
the water filter, reset the water filter status light.
The status light will change from red to green when the system is
reset.
Non-indicator
Water
Filter (on some
models)
If your refrigerator
does not have the status light, you should
change the water filter every 6 months depending
upon your
usage. If the water flow to the water dispenser
or ice maker
decreases
noticeably
before 6 months have passed,
replace the
water filter more often.
Using
the Dispenser
Without
the Water
Filter
You can run the dispenser
without a water filter. Your water will not
be filtered.
1.
Remove the water filter.
2.
Slide the cap off the end of the filter and replace the cap in the
base grille.
IMPORTANT:
Do not discard
the cap. It is part of your
refrigerator.
Keep the cap to use with the replacement
filter.
3.
Rotate the cap until it is securely in position.
Sample