Electrolux E23CS75DSS0 user manual download (Page 10 of 40)

Languages: English
Pages:40
You can view the full version and download it in PDF format.
Page 10 of 40
Connecting
The Water Supply
To connect the water supply to the rear of your refrigerator:
1
Ensure that the refrigerator is not plugged in.
2
Flush the supply line until water is clear by placing the end of the copper tube
in a sink or bucket and opening the shut=off valve.
3
Unscrew the plastic cap from the water valve inlet at
the rear of your refrigerator. Discard the cap.
4
Slide the brass compression
nut, then the ferrule
(sleeve) onto copper tube.
5
Push the copper tube into water valve inlet as far as it
will go (1/4 inch).
6
Slide the ferrule (sleeve) into valve and finger=tighten
the compression
nut onto valve. Tighten another half
turn with a wrench. Do not over=tighten,
7
Secure the copper tube to your refrigerator's
rear panel
with a steel clamp and screw (see illustration).
8
Coil the excess copper tubing (about 2½ turns) behind
your refrigerator as shown. Arrange coiled tubing to
avoid vibration or wear against other surfaces.
9
Open water supply shut=off valve and tighten any
connections that leak.
241540100_eb_sxs_Use&Care_En.pmd
10
1/22/2004,
10:33 AM
Sample
This manual is suitable for devices