Daewoo AFR-500F user manual download (Page 2 of 5)

Languages: English
Pages:5
You can view the full version and download it in PDF format.
Page 2 of 5
4
HOW TO CLEAN
3
HOW TO OPERATE
1. Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth, the inside
with a damp cloth.
2. Keep the door open and insert the power supply cord into the socket.
3. Turn the thermostat dial to “7”. Close the door and let the refrigerator operate
for 15-20 minutes.
The freezer should then show some traces of frost.
Starting your new Refrigerator
You can control the inside temperature by turning the
thermostat dial. Higher numbers mean greater cooling
power, smaller numbers mean less cooling power. To
make ice cubes in the freezer compartment, set the
dial to “7”. The dial does not have to be set exactly on
the numbers, but can be any place in between.
Temperature control
Defrost the refrigerator when the frost accumulated on the evaporator is about
5mm(1/5inch) thick.
Set the thermostat dial to “OFF”. Remove frozen or perishable foods.
Keep drip tray in place. Defrosting usually takes a few hours. To defrost quickly
remove all foods from the refrigerator and leave door open. Never use a knife or
other metal instrument to remove ice/frost from the evaporator. After defrosting
empty water from drip tray, return the thermostat dial to the desired position to start
refrigerating again.
How to defrost
6
7
5
4
3
2
1
OFF
C
O
L
D
E
R
TEMPERATURE
CONTROL
NOTE:
Wait 3 to 5 minutes before restarting if you unplug the machine. Unit
may fail to operate properly if restarted too quickly.
Cleaners :
cleaners noted below are available. Never use harsh, abrasive cleaners,
heavy-duty cleaners, or solvents on any surface.
Exterior
:
Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for
periodic waxing, use silicon wax.
Evaporator:
When refrigerator needs defrosting turn thermostat dial to “OFF”. Do
not use sharp instruments.
Refrigeration Section:
Wash shelves and other removable parts in warm sudsy
water, rinse and dry. Wash interior with baking soda
solution (3 table spoons to one quart of water) or warm
sudsy water, rinse and dry.
Magnetic Door Seals:
Wash with warm sudsy water.
The Finishing Touch:
Replace all parts and return thermostat dial to desired
setting.
HOW TO INSTALL
Install refrigerator in a convenient location away from extreme heat and cold.
Allow sufficient clearance between the refrigerator and side wall so the door will
open for a fully usable interior. Refrigerator is not designed for recessed
installation.
Select a place with strong level floor.
Allow 5 inches of space between the refrigerator’s side and the wall.
5
inches
Sample