Amana ASD2522WRB01 user manual download (Page 5 of 36)

Languages: English
Pages:36
You can view the full version and download it in PDF format.
Page 5 of 36
REFRIGERATOR
USE
4=
5.
A
B
C
A. Refrigerator water tubing
B. Nut (provided)
C. Bulb
D. Coupfing (purchased)
Turn shutoff
valve ON.
Check for leaks. Tighten
any nuts or connections
(including
connections
at the valve) that leak.
D
E
F
G
E. Ferrule (purchased)
F
Nut (purchased)
G. Household water fine
Style
3
1.
Unplug refrigerator
or disconnect
power.
2.
Remove and discard the black nylon plug from the gray water
tube on the rear of the refrigerator.
3.
Thread the provided
nut onto the water valve as shown.
NOTE: Tighten
the nut by hand. Then tighten
it with a wrench
two more turns. Do not overtighten.
A
I/
II
B
A. Bulb
B. Nut (provided)
4.
Turn shutoff
valve ON.
5.
Check for leaks. Tighten
any nuts or connections
(including
connections
at the valve) that leak.
Complete
the Installation
Electrical
Shock
Hazard
Plug into
a grounded
3 prong
outlet.
Do not remove
ground
prong.
Do not use an adapter.
Do not use an extension
cord.
Failure
to follow
these
instructions
can result
in
death,
fire, or electrical
shock.
For your convenience,
your refrigerator
controls
are preset at the
factory. When you first install your refrigerator,
make sure that the
controls
are still preset. The Refrigerator
Control
and the Freezer
Control should
both be set to the "mid-settings."
Style
1:
Rotary Controls
FREEZER
REFRIGERATOR
®
@
2
4
COLD
l_s
COLDER
2_e,
COLD
1
s COLDER
oQ
Style
2:
Slide
Controls
Freezer
Refrigerator
cold
1
2
A
3
4
colder
off
l
2
=,
3
4
colder
IM PORTANT:
Your product
will not cool when the REFRIGERATOR Control
is set to OFR
The Refrigerator Control
adjusts the refrigerator
compartment
temperature.
The Freezer Control
adjusts the freezer
compartment
temperature.
Settings
to the left of the mid-
setting make the temperature
less cold. Settings
to the right of
the mid-setting
make the temperature
colder.
Wait 24 hours before you put food into the refrigerator.
If you
add food before the refrigerator
has cooled completely,
your
food may spoil.
NOTE: Adjusting
the Refrigerator
and Freezer Controls
to a higher
(colder) than recommended
setting will not cool the
compartments
any faster.
Adjusting Controls
Give the refrigerator
time to cool down completely
before adding
food. It is best to wait 24 hours
before you put food
into the
refrigerator. The settings
indicated
in the previous section should
be correct for normal household
refrigerator
usage. The controls
are set correctly
when milk or juice is as cold as you like and when
ice cream is firm.
Rotary
Controls:
Turn the control
right (clockwise)
to make the
compartment
colder. Turn the control
left (counterclockwise)
to
make it less cold. To turn the cooling system off, turn the
Refrigerator
Control
counterclockwise
until it reaches the OFF
position.
Slide Controls:
Slide the control
one setting to the right to make
the compartment
colder. Slide the control one setting
to the left to
make it less cold.
1.
Plug into a grounded
3 prong outlet.
2.
Flush the water system.
See "Prepare the Water System"
or
"Water and Ice Dispensers."
NOTE: Allow
24 hours to produce the first batch of ice. Allow
3 days to completely
fill ice container.
Sample