Amana ASD2522WRB01 user manual download (Page 3 of 36)

Languages: English
Pages:36
You can view the full version and download it in PDF format.
Page 3 of 36
Explosion
Hazard
Keep
flammable
materials
and
vapors,
such
as
gasoline,
away
from
refrigerator.
Failure
to
do so can
result
in death,
explosion,
or fire.
To ensure proper ventilation
for your refrigerator,
allow for 1/2"
(1.25 cm) space on each side and at the top. When installing
your
refrigerator
next to a fixed wall, leave 2" (5.08 cm) minimum
on
each side (depending
on your model) to allow for the door to
swing open. If your refrigerator
has an ice maker, allow extra
space at the back for the water line connections.
NOTES:
It is recommended
that you do not install the refrigerator
near
an oven, radiator, or other heat source. Do not install in a
location
where the temperature
will fall below 55°F (13°C).
Normal minimum
cabinet
cut-out
width
required for product
installation
is 36" (91.44 cm). However, if the product
is placed
against an extended
wall and the ability to remove the crisper
pans is desired, an additional
18" (45.72 cm) of cabinet width
is required, so a total
cabinet opening
width of 54"
(137.16 cm)is
recommended.
Electrical
Shock
Hazard
Plug into
a grounded
3 prong
outlet.
Do
not
remove
ground
prong.
Do
not
use an adapter.
Do
not
use
an extension
cord.
Failure
to follow
these
instructions
can
result
in
death,
fire, or electrical
shock.
Before you move your refrigerator
into its final location,
it is
important
to make sure you have the proper
electrical connection.
Recommended
Grounding
Method
A 115 Volt, 60 Hz., AC only, 15- or 20-amp
fused, grounded
electrical
supply
is required. It is recommended
that a separate
circuit serving only your refrigerator
be provided.
Use an outlet
that cannot
be turned off by a switch.
Do not use an
extension
cord.
NOTE:
Before performing
any type
of
installation,
cleaning,
or
removing
a light bulb, turn the control (Thermostat,
Refrigerator
or
Freezer Control depending
on the model) to OFF and then
disconnect
the refrigerator
from the electrical
source. When you
are finished,
reconnect
the refrigerator
to the electrical source
and
reset the control
(Thermostat,
Refrigerator
or Freezer Control
depending
on the model) to the desired setting.
See "Using the
Controls."
Gather the required tools and parts before starting
installation.
Read and follow the instructions
provided with
any tools listed
here.
TOOLS
NEEDED:
Flat-blade
screwdriver
1/4"Nut driver
7/le"and 1/2"Open-end
or two
1/4"Drill bit
adjustable
wrenches
Cordless
drill
NOTE:
Your refrigerator
dealer has a kit available with
a 1/4"
(6.35 mm) saddle-type
shutoff valve, a union, and copper
tubing.
Before purchasing,
make sure a saddle-type
valve complies
with
your local plumbing
codes. Do not use a piercing-type
or ¾e"
(4.76 mm) saddle valve which
reduces water flow and clogs more
easily.
IMPORTANT:
All installations
must meet local plumbing
code requirements.
Use copper
tubing and check for leaks. Install copper tubing
only in areas where the household
temperatures
will remain
above freezing.
Sample