Amana A8RXNGMWB01 user manual download (Page 6 of 40)

Languages: English
Pages:40
You can view the full version and download it in PDF format.
Page 6 of 40
7. Slipthecompression
sleeve
andcompression
nutonthe
copper
tubingasshown.
Insert
theendofthetubing
intothe
outlet
endsquarely
asfarasitwillgo.Screw
compression
nut
ontooutlet
endwithadjustable
wrench.
Donotovertighten.
8. Place
thefreeendofthetubing
inacontainer
orsink,
and
turnONthemainwater
supply.
Flush
thetubinguntil
water
is
clear.
TurnOFF
theshutoff
valveonthewater
pipe.Coil
the
copper
tubing.
Connect
to Refrigerator
NOTE:
Onkitmodels,
assemble
water
valve
torefrigerator
perkit
instructions.
Style
1
1.
Unplug
refrigerator
or disconnect
power.
2.
Attach the copper
tube to the valve inlet using a compression
nut and sleeve as shown. Tighten
the compression
nut. Do
not overtighten.
3.
Use the tube clamp on the back of the refrigerator
to secure
the tubing
to the refrigerator
as shown. This will help avoid
damage
to the tubing when the refrigerator
is pushed back
against the wall.
4.
Turn shutoff
valve ON.
5.
Check for leaks. Tighten
any connections
(including
connections
at the valve) or nuts that leak.
A. Tube clamp
B. Copper
tubing
C. Compression
nut
D. Valve inlet
6.
The ice maker is equipped
with a built-in water strainer. If your
water conditions
require a second
water strainer, install it in
the 1/4"(6.35 mm) water line at either tube connection.
Obtain
a water strainer from your nearest appliance
dealer.
Style 2
1.
Unplug
refrigerator
or disconnect
power.
2.
Disconnect
the tube clamp
on the back of the product
and
insert the copper
tubing
through
the clamp as shown.
3.
Attach the copper
tube to the valve inlet using a compression
nut and sleeve as shown.
4.
Tighten the compression
nut. Do not overtighten.
Reattach
the tube clamp and tube to the back of the cabinet.
Q
..............................................
A
I
B
C
A. Tube clamp
C. Compression
nut
B. Copper
tubing
5.
Turn shutoff
valve ON. Check for leaks. Tighten
any
connections
(including
connections
at the valve) or nuts that
leak.
6.
The ice maker
is equipped
with
a built-in
water strainer. If
your water conditions
require a second
water strainer,
install
it in the 1/4"(6.35 mm) water line at either tube connection.
Obtain a water strainer
from your nearest appliance
dealer.
Complete
the Installation
Electrical
Shock
Hazard
Plug into
a
grounded
3 prong
outlet.
Do
not
remove
ground prong.
Do
not
use an adapter.
Do
not
use an extension
cord.
Failure
to follow
these
instructions
can result
in
death,
fire, or electrical
shock.
Plug into a grounded
3 prong outlet.
NOTE: Allow
24 hours to produce
the first batch of ice. Discard
the first three batches
of ice produced.
Allow 3 days to
completely
fill ice container.
TOOLS
NEEDED:
5/le"hex-head
socket
wrench,
#2 Phillips
screwdriver,
flat-blade
screwdriver,
5/le" open-end
wrench,
flat
2" putty knife.
IMPORTANT:
Before you begin, turn the refrigerator
control
OFE Unplug
refrigerator
or disconnect
power.
Remove
food and adjustable
door or utility
bins from doors.
If you are only removing
and replacing
the doors, see the
"Remove
Doors and Hinges"
and "Replace
Doors and
Hinges"
sections.
Depending
on your model,
you may have standard
(Style
1)
or contoured
(Style 2) doors. If you are also going to reverse
the door swing,
follow the instructions
for the appropriate
door style.
Remove
Doors
and
Hinges
_;,/16"
Hex-Head Hinge Screw
1.
Unplug refrigerator
or disconnect
power.
2.
Close the refrigerator
door and keep both doors
closed
until
you are ready to lift them free from the cabinet.
NOTE: Provide
additional
support
for the doors while the
hinges are being moved. Do not depend
on the door magnets
to hold the doors
in place while you are working.
3.
Remove
the parts for the top hinge as shown
in Top Hinge
graphic.
Lift the freezer door free from the cabinet.
6
Sample